SN74LVT162245AZQLR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SN74LVT162245AZQLR is one of a series of logic devices from Texas Instruments incorporating advanced features that optimize the device for high-performance low-voltage applications. The SN74LVT162245AZQLR is a low-voltage, high-performance BiCMOS device designed for high-speed 3.3-V operation. The device is best assigned to the general category of Logic - Buffers, Drivers, Receivers, Transceivers.

The SN74LVT162245AZQLR is a dual non-inverting buffer/line driver with 3-state outputs. It can be used to drive the signal to the high speed devices like FPGA, CPLD, etc. The device is recommended for use over the operating temperature range of 0C to 70C and is also available in extended temperature range of -40C to 105C.

The SN74LVT162245AZQLR has an input-to-output propagation delay (tpd) of 10ns. It is intended for low-voltage applications where reliable low-voltage operation is the system requirement. The device can operate over the maximum operating voltage range of 2.7V to 3.6V and the input voltage range is from -0.5≤VIN≤+4.6V. The input hysteresis for low-voltage operation is 100mV.

The SN74LVT162245AZQLR has outputs that source/sink 24mA schmitt-triggered inputs that are designed to provide a higher noise immunity. It supports 24mA drive capability at to 5V. It has the output logic threshold of 0.8V for low level and 2V for high level. The output voltage can be adjusted up to ±2V.

The SN74LVT162245AZQLR is equipped with output enable (OE) pins that let you turn on/off the outputs. The device has an active low output enable/disable signal (EN). It contains an internal latch that holds the output state, even if the OE is changed to logic ‘1’.

SN74LVT162245AZQLR is mainly used in applications such as line termination, bus-hold, bus-contention, bus-switching, data-transmission, line-receiving, serial data broadcasting and data-reception, and data-matching/bit-slicing/signal processing. According to manufacturers, the device is best suited for driving high capacitance loads at high speed, where it offsets the load capacitance, resulting in improved ac characteristics.

The SN74LVT162245AZQLR is categorized as a low-voltage, high-performance BiCMOS device designed for high-speed 3.3-V operation, and its intended application is in the Logic - Buffers, Drivers, Receivers, Transceivers area. The device is popularly used as a line driver and a line receiver in digital systems, where it can be employed to terminate, switch and multiplex data signals, as well as process high-speed serial and parallel data transmission and reception. The device supports up to 24mA of output driver capability and has an input-to-output propagation delay as low as 10ns.

The specific data is subject to PDF, and the above content is for reference