SN74S244DWR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Logic-buffers, drivers, receivers, and transceivers are some of the most important components of an electronic circuit. The SN74S244DWR is an integrated circuit that belongs to this category. It is a quad 3-state buffer and consists of four separate non-inverting buffers. Each buffer has three output enable pins that can be used to control the output state.

The SN74S244DWR is mainly used in applications where additional drive circuitry is required or where several input signals are multiplexed to one bus. It supports TTL systems compatibility and provides very high switching speed, low power consumption, low static power and low propagation delay. Typical applications for this device include device interfacing, signal routing, and data processing.

The SN74S244DWR works by taking a single input signal and transferring it to a single output. Each of its four buffers contains an input circuit and a 3-state output circuit. The input circuit of each buffer consists of an output pin and a control signal line. When the control signal is activated, a low resistance path is created from the input pin to the output pin. This allows the signal to pass through the buffer and reach the intended destination.

When the control signal is inactive, the 3-state output circuit will remain in its high-impedance state, allowing the signal to remain in its original form without corruption or interference. This ensures that there is no signal loss in the connection and that the right signals reach their respective destinatiions each time.

The SN74S244DWR can also be used in applications that require multiple input lines being applied to the same output line. In this setup, the control signal line can be used to activate a single one of the four buffers at a time. The input signals from each buffer are then transferred to the output line where the signal can be passed to other devices or systems.

Due to its high-speed and low-power consumption, the SN74S244DWR is commonly used in a wide range of devices and applications, such as in digital televisions, programmable logic arrays, memory chips and automotive electronic systems. It provides reliable signal transfer and low-voltage operation, making it an efficient and cost-effective choice for many electronics systems.

The specific data is subject to PDF, and the above content is for reference