SN75154DG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SN75154DG4 is an integrated circuit designed for use in TTL systems to provide bidirectional drive and receive capability between two data buses. The SN75154DG4 is a 14-pin integrated circuit designed for use in TTL systems in applications where bidirectional drive and receive capability between two data lines is necessary. The SN75154DG4 is an ideal solution for applications where a two-way data bus interface is required, because it contains built-in drivers, receivers, and transceivers. It is capable of simultaneously driving and receiving data on both buses, and has the ability to automatically switch between the two depending on the conditions of the micro-pc.The SN75154DG4 has 14 pins, with the first 8 pins used for the data input/output of the two buses and the remaining 6 pins used for signal conditioning. The first 8 pins provide four independent signal paths, two with full sign extension and two with half sign extension. This allows the signal condition to be adjusted to the system requirements. The remaining 6 pins provide power and ground connections, as well as signals for enabling and disabling the drivers and receivers.The SN75154DG4 is designed to operate in TTL systems, which means that it will operate at a voltage between 0V and 5V (ground being 0V and the invalid being 5V). The SN75154DG4 has a current output of 5mA and is capable of handling data rates up to 10 Mbps. The output drivers are designed for direct drive capability and are capable of driving up to 32mA when properly configured.The SN75154DG4 has two drivers, two receivers, and two transceivers, each of which is designed to provide bidirectional drive and receive capability. The drivers are used to drive the data line in either one direction or the other, depending on the system requirements. The transceivers are used to transfer data between the two buses, while the receivers are used to receive data from the other bus.The SN75154DG4 has two operating modes: normal and inverted. When in normal mode, both drivers are enabled and receive data from their respective input lines. When in inverted mode, the drivers become disabled and the receivers become enabled. In this mode, the drivers only receive data from the corresponding input lines, while the receivers can both receive data from the corresponding output lines.The SN75154DG4 is an ideal solution for providing bidirectional drive and receive capability in TTL systems because of its small size, low power consumption, and high-frequency response. Its drivers, receivers, and transceivers also provide the necessary conditions for increased data transmission efficiency. In addition, the SN75154DG4 is capable of interfacing with a wide variety of TTL devices, making it an ideal choice for a wide range of applications.

The specific data is subject to PDF, and the above content is for reference