SN75176APG4

Series:	--
Packaging:	Tube
Part Status:	Active
Type:	Transceiver
Protocol:	RS422, RS485
Number of Drivers/Receivers:	1/1
Duplex:	Half
Receiver Hysteresis:	50mV
Data Rate:	--
Voltage - Supply:	4.75 V ~ 5.25 V
Operating Temperature:	0°C ~ 70°C
Mounting Type:	Through Hole
Package / Case:	8-DIP (0.300", 7.62mm)
Supplier Device Package:	8-PDIP
Base Part Number:	SN75176A

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Interface - Drivers, Receivers, TransceiversSN75176APG4 is a high-performance quad-differential line driver with relatively low power consumption. It is specially designed for high-speed applications and can handle data rates of up to 100 Mbps. It is well suited for driving twisted pair cables and is highly integrated for cost effective applications.In a general sense, the SN75176APG4 operates by transmitting and receiving various logical levels on four differential lines. This allows for full-duplex transmission of four independent data streams and allows for balanced data transmission with optimized common-mode noise rejection. In order to meet the data-rate requirements for high-speed applications, the SN75176APG4 includes special gate drive stages, protection against short-circuit and over-current conditions, high slew-rate outputs and relatively low power consumption.The most common application field of the SN75176APG4 is high-speed ethernet. It is used to convert digital signals between a network device (e.g. router, switch, hub, etc.) and the twisted-pair patch cable that usually connects to a host computer. It handles data transmission via the four differential lines, with each pair transmitting a single data stream in full-duplex.The SN75176APG4 is also used in other high-speed applications, such as inter-board communication, industrial control and automation, and digital audio. Its low power consumption and integrated protection features make it well suited for noise-susceptible environments.The SN75176APG4 integrates several stages in order to achieve the required performance. It includes a differential line receiver stage, which is responsible for detecting transitions and generating the voltages for the outputs. The differential line receiver is connected to a balanced line driver, which is responsible for driving the four differential lines and for generating the required waveform for proper transmission.The SN75176APG4 also includes protection circuitry for various fault conditions, including short-circuit and over-current conditions, as well as an output disable and an output enable circuit. The output disable circuit is responsible for disabling the output drivers and switching off all four differential output lines. The output enable circuit is responsible for providing a logic level input to re-enable the four output drivers.In summary, SN75176APG4 is a high-performance quad-differential line driver with relatively low power consumption. It is commonly used in high-speed ethernet applications as well as other industrial and digital audio applications, and is specially designed for full-duplex transmission of four independent data streams. It offers protection against various fault conditions, as well as output enable and disable circuitry. Its integration with other components offers cost effective solutions for the most demanding applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description