SN75188N

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SN75188N is a quad-line differential line driver integrated circuit that enables the reliable transfer of digital signals over greater distances. This component is frequently used in applications requiring a data bus between ICs, especially computer busses. It is a logic buffer, meaning it takes an input signal as a digital “1” or “0”, and then outputs that same signal in the same form. This offers the added benefit of adding a degree of noise protection for sensitive signals.

First designed by Texas Instruments in 1984, the SN75188N is a valuable component when it comes to interacting with various systems from different vendor companies. This device is particularly useful in systems requiring simultaneous transmission and reception of multiple signals. It is also capable of operating at breakneck speeds, as its rise and fall times can be as short as 25 nS.

This component is typically found in interface applications, such as drivers, receivers, transceivers, or any other situation where a reliable signal transfer is necessary between two circuits. It is essential for digital communication between two devices, either directly or through the use of a twisted pair of cables. Because of the differential standard operation of the SN75188N, the typical application is to use the Receiver/Transmitter pinout of the two together, as they were designed to work together.

The SN75188N is an 8-pin component that features 8 voltage-controlled signals. It is powered by 5V and includes both an enable and an active-low Input signal. This component operates as two 4-channel line drivers, with two independent enable signals, thereby allowing operation of each half separately. When disabled, all 4 outputs from each half remain unchanged, allowing for a high impedance line-driver configuration.

Working Principle:
The SN75188N is designed to receive input signals from a data bus or other high-speed signals, convert them into a form for transmission, and output them in the same form. It does this by using a differential line driver, meaning it operates by generating a signal with a separate wire for each polarity. This type of communication works by transmitting the output signal along two identical wires - one with positive polarity and the other with negative polarity. The transmitted signal is then received and compared with the signal generated on the two wires. If there is a mismatch between the two signals, this will be detected and the received signal can either be blocked or the signal can be inverted, depending on the application.

The SN75188N is a high-speed line driver with fast rise and fall times, making it convenient for a wide range of digital applications, especially parallel busses and high-speed data line transfers. It can also be used in a variety of bus Topologies and is capable of transmitting up to 500 Mbit/s in a balanced line environment. The SN75188N line driver is ideal for applications that require reliable, consistent, and fast communication between two different systems. It enables communication to take place even in noisy environments, due to its differential working principle.

The specific data is subject to PDF, and the above content is for reference