SN75ALS162DWG4

Series:	--
Packaging:	Tube
Part Status:	Active
Type:	Transceiver
Protocol:	IEEE 488
Number of Drivers/Receivers:	8/8
Duplex:	Half
Receiver Hysteresis:	650mV
Data Rate:	--
Voltage - Supply:	4.75 V ~ 5.25 V
Operating Temperature:	0°C ~ 70°C
Mounting Type:	Surface Mount
Package / Case:	24-SOIC (0.295", 7.50mm Width)
Supplier Device Package:	24-SOIC
Base Part Number:	75ALS162

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

SN75ALS162DWG4 Application Field and Working Principle

The SN75ALS162DWG4 is a low power, 32-bit register-to-register device with an expandable bus transceiver and bus latches in a Rail-to-RailTM package. This device is an ideal choice for any bridge, core logic, register-to-register or FIFO applications requiring a high performance, low-power solution.The SN75ALS162DWG4 is a 32-bit register-to-register device with a 5-bit or 12-bit or 16-bit expandable bus transceiver and bus latches in an RJ-45 package. The device operates on the 5V supply voltage, with the operating voltage range from 4V to 5.5V. The minimum and maximum recommended supply voltage is 3.3V and 5.5V, respectively, with a maximum operating temperature of 70°C.The SN75ALS162DWG4 is designed for applications requiring high performance and low power, with a total static power consumption of about 0.4mA. The device features three data width options, a 5-bit, 12-bit or 16-bit, and can be configured in different modes by programming the Mode Select pin.The SN75ALS162DWG4 is a multiplexing FIFO register with a Mode Select input pin. This pin can be used to select a multiplexing mode, two different registers, two single registers or two split registers. The SN75ALS162DWG4 also features a Data Ready signal, which is high when new data is available in the FIFO buffer and low when no new data is available.When configured as a multiplexing FIFO register, the SN75ALS162DWG4 can be used to read data from memory and write data to memory simultaneously in the same bus cycle. The Data Ready signal is high, indicating that new data is available, when the Data Ready pin is asserted. When cleared, the Data Ready signal is low, indicating that there is no new data available.In terms of performance, the SN75ALS162DWG4 operates up to speeds of 30 MHz, with a maximum frequency of 50 MHz. The device also has programmable bus hold time, allowing for various system environments with different data propagation delay times. The SN75ALS162DWG4 also features glitchless power-on-reset, eliminating errors associated with asynchronous system behavior.Finally, the SN75ALS162DWG4 offers both sink and source current/voltage protection featuring an adjustable threshold voltage, allowing for excellent noise immunity in noisy conditions.In summary, the SN75ALS162DWG4 is an ideal solution for register-to-register or FIFO applications requiring high performance and low power usage. The device is capable of speeds up to 30 MHz, has an adjustable bus hold time, glitchless power-on-reset, and excellent noise immunity. The SN75ALS162DWG4 is well suited for bridge, core logic and register-to-register applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description