SN75ALS164DW

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SN75ALS164DW is an 8-pin transceiver IC from Texas Instruments. It is part of their Wide Operational Range (WOR) family. The IC is designed for asynchronous communication over a two-wire bus. It can be used for applications such as serial-port communication, RS-485, and other point-to-point bidirectional communications. It is also ideal for use in master/slave interfaces.

The SN75ALS164DW is a high speed, low-power transceiver with a working voltage of 3.3V to 12V. It is capable of data rates up to 200 kilobits per second (kbps) at 3.3V and 500kbps at 5V. It features a bus-hold feature that allows it to hold the signal level of the receiver input after the transmitting signal has been removed. The integrated receivers have 0.8Vdd hysteresis, eliminating the need for external resistors in many applications.

The SN75ALS164DW has two power supply pins: VCC (3.3V–12V) and VEE (Ground). It has a data transmission enable pin (T–EN), a data output enable pin (R–EN) and an active-low reset pin (RESET). The device is configured like a parallel bus, allowing it to be used as both a transmitter and a receiver.

The SN75ALS164DW is designed to work in either unidirectional or bidirectional mode. In unidirectional mode, the device transmits data with one driver and receives data with one receiver. In bidirectional mode, both the transmitter and receiver are enabled at the same time. This allows data to flow both ways simultaneously.

The SN75ALS164DW has four pins for data I/O: two for receiving (RxD) and two for transmitting (TxD). Data is transmitted serially, bit-by-bit over the TxD pins. Data is received serially, on a bit-by-bit basis, on the RxD pins. The device supports serial communication at speeds up to 200 Kbps at 3.3V and 500 Kbps at 5V.

The SN75ALS164DW is an important component for use in industrial, automotive, medical, and consumer electronics applications. It is a low-power, high-speed transceiver IC with the ability to transmit and receive data serially and operate at high data rates. It allows point-to-point and master/slave communication and supports both unidirectional and bidirectional communication.

The specific data is subject to PDF, and the above content is for reference