SN75C1167NSRG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to SN75C1167NSRG4

The SN75C1167NSRG4 is an electronic component designed to enable communications and signal processing in a variety of applications. It is a 3-channel RS-485 transceiver for serial bus, providing a full-duplex serial communication interface with the application field’s protocol. The component features a low-noise, 100 Mbps low-voltage differential signaling (LVDS) transceiver system consisting of two differential line drivers, two differential line receivers and a differential transceiver for bus mastering applications. It provides a means for serial-bus devices to talk to one another, with individual drivers and receivers allowing each device to talk without interference. It also supports broadcast, point-to-point and point-to-multipoint networks.

Types of Applications

The SN75C1167NSRG4 is commonly used in applications where multiple devices must communicate over a single data line, such as industrial automation, audio, video and medical imaging systems. It can also be used in medical, communication and automotive applications where high-bandwidth communications are required. In addition, it can be used in building management, access control, and home automation systems.

Working Principle

The SN75C1167NSRG4 works by enabling communications between a number of electronic devices that are connected over a single data line. Each device has a transmit (TX) and a receive (RX) line connected to the SN75C1167NSRG4. The SN75C1167NSRG4 then converts the signals received from each device into a digital data stream, which is then sent to the intended receiving device. Each device is assigned a specific data rate, usually established by the protocol used. The SN75C1167NSRG4 also supports commands to switch between transmitter and receiver states.

In the transmit mode, the SN75C1167NSRG4 acts as an active element by generating an output signal by using the data supplied to its input pins. This signal is then sent to the receiving device over the data line. In the receive mode, the SN75C1167NSRG4 acts as a passive element by receiving the data stream sent from the transmitting device. The SN75C1167NSRG4 then converts this data stream into a digital signal, which can be used by the receiving device.

The SN75C1167NSRG4 also supports a feature called broadcast address detection. This allows the SN75C1167NSRG4 to determine the broadcast address used by the transmitting device and forward the received data to all connected receivers. This ensures that all devices connected to the system receive the same data.

Conclusion

The SN75C1167NSRG4 is an important electronic component designed to enable communications and signal processing in a variety of applications. It is commonly used in industrial automation, audio, video and medical imaging systems, as well as in medical, communication and automotive applications. It functions by converting the signals received from each device into a digital data stream, which is then sent to the intended receiving device. The SN75C1167NSRG4 also supports broadcast address detection, allowing it to forward the received data to all connected receivers.

The specific data is subject to PDF, and the above content is for reference