SN75C1168NG4

Series:	--
Packaging:	Tube
Part Status:	Active
Type:	Transceiver
Protocol:	RS422, RS485
Number of Drivers/Receivers:	2/2
Duplex:	Full
Receiver Hysteresis:	60mV
Data Rate:	--
Voltage - Supply:	4.5 V ~ 5.5 V
Operating Temperature:	0°C ~ 70°C
Mounting Type:	Through Hole
Package / Case:	16-DIP (0.300", 7.62mm)
Supplier Device Package:	16-PDIP
Base Part Number:	75C1168

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The SN75C1168NG4 is an interface device for data transmission and conversion. It is a multichannel multi-driver (MDM) transceiver that combines a receiver, a transmitting and receiving driver, and a transmission waveform shaping circuit. It is best suited for applications such as high speed, short-distance communication, Bit Synchronous Mode, used in embedded systems and communication networks, and industrial automation networks.

Application Field

The SN75C1168NG4 is a flex-powered transceiver with a data rate of up to 10 Mbps and a range of up to 1 km. It is ideal for applications that require high speed, short-distance communication, such as embedded systems and industrial automation networks. Its transmission and reception capabilities make it suitable for applications such as local area networks (LANs), communication links, and intracontroller data communication.

Features and Specification

The SN75C1168NG4 supports both unidirectional communications and bit synchronous full-duplex communications. It has a transmission line current of up to 10 mA, a maximum data rate of 10 Mbps, a control line current of up to 10 mA, a power supply voltage range of 4.5-5.5V, a propagation delay time of 50ns, and a fully automatic differential short circuit protection. It also features built-in thermal protection, a built-in startup circuit and sleep function, and includes an analog output pin.

Working Principle

The SN75C1168NG4 consists of two drivers, two receivers, and a transmission circuit. The two drivers, which have their own different voltage levels, send out electrical signals to communicate with other electronic devices. The receivers detect the incoming signal and read its signal level. The transmission circuit determines the output waveform according to the signal level detected by the receivers. The transmission circuit also ensures that the signal is transmitted with the appropriate delay so that it can be read by the receivers.

Conclusion

The SN75C1168NG4 is a highly reliable and flexible interface device for data transmission and conversion. It is ideal for short-distance communication applications, such as embedded systems and industrial automation networks. Its features such as transmission line current of up to 10 mA, maximum data rate of 10 Mbps, and built-in thermal protection, make it suitable for a variety of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description