SN75LBC784DWG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SN75LBC784DWG4 is a high-performance bus transceiver featuring very low skew between output signals, high noise immunity, and very robust ESD protection. It is designed for fast partial and full-duplex asynchronous and synchronous communication designed for a large bus application field as mentioned in its datasheet.

The SN75LBC784DWG4 consists of two transceivers and four operational amplifiers, with each capable of transferring 8-bit bytes of data at high speed. It operates at a wide range of supply voltages, from 5V to 15V. This is advantageous as it allows the device to be used in higher-speed bus applications and provides greater flexibility in design.

On the interface side, this transceiver is quite versatile. It has two differential current-mode outputs and four current-mode outputs, enabling it to interface with both synchronous and asynchronous buses. The differential outputs are able to support input clock frequencies up to 400 MHz, making them suitable for high-speed point-to-point applications. On the asynchronous side, this transceiver provides separate management and data ports, allowing for independent flow control of the data. The data port is also able to transfer eight-bit bytes quickly at rates up to 10MHz.

The SN75LBC784DWG4 transceiver uses a differential current-mode driver to drive the bus lines and the receivers use a differential current-mode receiver. This makes it a robust transceiver suitable for high-speed operation in noisy environments. It also features open-circuit, packet preamble, and packet error detection and correction, as well as low skew between data drivers. All these features make the SN75LBC784DWG4 an excellent choice for many applications.

The SN75LBC784DWG4 transceiver operates by converting electrical data signals between parallel and serial data buses. The serial format is referred to as the differential current-mode format. The data is first created on the parallel bus, and then converted to the differential current-mode before it is input into the transceiver. The converted data is then output onto the serial bus. The transceiver then converts it back to the parallel bus format and sends it to the destination.

In addition, the SN75LBC784DWG4 transceiver incorporates a built-in automatic wave shaping to make sure signals don\'t exceed the transmitted wave form limits. This ensures waveforms are within limits even when signals are subjected to noise. The SN75LBC784DWG4 also includes an open-circuit buzzer, allowing users to detect open-circuit problems in the interface.

The SN75LBC784DWG4 is a versatile bus transceiver that supports a wide range of application fields. This transceiver can be used in high speed point-to-point communication, Asynchronous and Synchronous buses, and any other applications that require high noise immunity and robust ESD protection. Its low skew between output signals makes it suitable for high speed operation and its open-circuit buzzer provides users with a reliable way to detect open-circuit issues in the interface. With all these features, the SN75LBC784DWG4 is the perfect choice for a wide variety of interfaces.

The specific data is subject to PDF, and the above content is for reference