SN75LVDT390PWG4

Series:	--
Packaging:	Tube
Part Status:	Active
Type:	Receiver
Protocol:	LVDS
Number of Drivers/Receivers:	0/4
Duplex:	--
Data Rate:	200Mbps
Voltage - Supply:	3 V ~ 3.6 V
Operating Temperature:	0°C ~ 70°C
Mounting Type:	Surface Mount
Package / Case:	16-TSSOP (0.173", 4.40mm Width)
Supplier Device Package:	16-TSSOP
Base Part Number:	75LVDT390

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

SN75LVDT390PWG4, developed by Texas Instruments, is an ultra-low voltage differential data transmission/receiving bus transceiver. It was designed to handle high-speed, differential data signals that maintain signal integrity over long distances at low power. The SN75LVDT390PWG4 is a full-duplex transceiver, which means that it can both transmit and receive data simultaneously. This makes it ideal for applications such as Gigabit Ethernet, Serial ATA (SATA), and Bluetooth, as well as other serial bus protocols.The SN75LVDT390PWG4 offers a wide range of features and benefits, such as low power consumption, high data rate, low quiescent current, low noise, waveform linearity, and the ability to support multiple data layers simultaneously. Additionally, it is designed to operate from a single 3.3V or 5V power supply and can be used in AC-coupled and DC-coupled environments. The device is housed in a small 8-pin MSOP package and is lead-free and RoHS compliant.The working principle of the SN75LVDT390PWG4 is based on differential data transmission and reception. It has two differential transceivers with level-shifting inputs and outputs. Each transceiver channel contains two data pins, an active-low output enable signal, and a direction pin to control which direction the signal is sent. For example, if the direction pin is set to “1”, the signal will be sent out of the ENSB pin. When data is received, the direction pin should be set to “0”, and the signal will be received through the INSB pin. The level-shifting input on each transceiver channel can accept signals from either a 5V or 3.V bias.The SN75LVDT390PWG4 is suitable for a wide range of applications. It can be used in high-speed serial buses, such as Gigabit Ethernet, Serial ATA (SATA), and Bluetooth. It can also be used in DC-coupled differential signal data transmission, such as in low-power or high-speed applications. It is also suitable for a variety of AC-coupled high-speed serial bus communications, such as USB and I2C, which require low quiescent current and low power consumption.In summary, the SN75LVDT390PWG4 provides a low-cost, low-power, full-duplex transceiver solution with differential data transmit and receive capability. The device is housed in a small 8-pin MSOP package and is lead-free/RoHS compliant. It is suitable for a variety of applications such as Gigabit Ethernet, Serial ATA (SATA), and Bluetooth, as well as other serial bus protocols. It accepts signals from either a 5V or 3.3V power supply and is capable of providing high data rate transmission and reception.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description