SP3232EHET-L

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

SP3232EHET-L is a high speed, low voltage differential signaling (LVDS) device designed for data communications applications. It is designed to drive 32-bit digital signals over a low voltage differential signalling (LVDS) link, with a data rate of up to 3.2Gbits/s. It is suitable for a wide range of applications, such as LCD panel interfaces, video interfaces, and other data transfers.

SP3232EHET-L Application Field

SP3232EHET-L is used in a wide range of data communications applications including LCD display, video interface, and microcontroller/peripheral data transfer. Its features include a low voltage differential signaling (LVDS) rate of up to 3.2Gbits/s, now 32-bits of data can be transmitted over a single LVDS link. The device also includes data scramble, clock detect, and enables reduced EMI (Electro Magnetic Interference) for more reliable data transfers. The main application field for SP3232EHET-L is LCD display interface, as it is capable of driving a variety of LCD panel sizes, from small displays to larger ones. In terms of video interface, the device is capable of driving video signals from microcontrollers and peripheral devices. Other applications include the data transfer of digital audio signals, pager and GSM phones, and other digital-to-analog or analog-to-digital conversions.

SP3232EHET-L Working Principle

The SP3232EHET-L device works on the principle of low voltage differential signaling (LVDS). It uses a pairs of logic signals (Data+ and Data-) that represent a single logic state. These two signals switch between different voltages. When a pair of signals are transmitted across a differential pair of lines the voltage at the receiver end will be the average of the two signals (Data+ and Data-), this is known as the common mode voltage. This allows for a much more reliable signal transfer than single ended signalling and is especially useful in noisy environments. The SP3232EHET-L has a differential receiver that compares the Data+ and Data- voltages and converts them into a logic level based on the common mode voltage. The SP3232EHET-L also includes deskew clock detect circuitry which will detect any possible clock skew between the transmitting and receiving signals, and adjust accordingly.

To ensure error free data transmission and receiving, the device has built-in error correction capabilities. It includes a built-in scrambler to scramble data so that it is not easily interpreted by noise or other disturbances. Also the circuit includes a built-in retimer to reduce bit errors and clock jitter when the receiver clock rate is lower than the transmitter clock rate. Finally the device includes an Analog Multiplexer to reduce signal degradation through the PCB and a Differential Driver interface to improve EMI/RFI performance.

The SP3232EHET-L is an ideal device for high speed, low voltage differential signalling applications. Its wide range of features, including clock detection, data scrambling, and error correction make it an ideal choice for data communication applications. It provides reliable signal transfer over a wide range of applications, from LCD displays to video interfaces to other digital-to-analog conversions, at a very low cost.

The specific data is subject to PDF, and the above content is for reference