SPM15-033-Q48-C

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

DC DC converters are devices which convert a Direct Current (DC) of one voltage level to another DC voltage level. This conversion process is enabled by the introduction of a secondary, or transformer, circuit. The primary circuit is the source of the DC power, and the secondary circuit is connected in such a way that a change in the primary circuit is transferred to the secondary circuit. This transfer of power occurs through the introduction of electric and magnetic fields.

SPM15-033-Q48-C application field and working principle

The SPM15-033-Q48-C is a DC DC converter designed to provide up to 48 volts of continuous output power from a nominal voltage input of 15 volts. The device consists of two separate converter stages, a primary boost stage and a secondary buck-boost stage. The primary stage is designed to incrementally step up the input voltage to the highest output voltage. The secondary stage is designed to fine-tune the output voltage to match the required output power requirements.The SPM15-033-Q48-C is typically used in system designs which require higher input voltage requirements than the available primary input voltage can provide. It is also suitable for applications such as distributed power architectures where the output voltage needs to remain constant regardless of fluctuations in the input voltage. The two stages of the SPM15-033-Q48-C work in tandem to provide a smooth and regulated output voltage which is able to remain within the required output voltage range over a wide input voltage range. The primary stage uses an advanced switching technique in order to step up the input voltage from the input source to the highest required output voltage, while the secondary stage uses a sophisticated buck-boost topology in order to regulate the output voltage.The primary boost stage provides a high efficiency conversion of the input voltage into the required output voltage. This stage consists of an inductor and a transistor switch, where the inductor acts as an energy storage device and the transistor switch acts as a current regulator. When the transistor switch is turned on, it causes current to flow through the inductor, which stores energy in the form of a magnetic field. When the transistor switch is then turned off, the stored energy in the inductor is then released into the output circuit, increasing the voltage present in the output circuit.The secondary buck-boost stage takes the step-up voltage from the primary stage and further fine-tunes it to the specified output voltage. This stage consists of two transistor switches connected in a buck-boost configuration. When the first transistor switch is turned on, it draws current from the input source, while the second transistor switch draws current from the output source. The two transistor switches work together to regulate the output voltage and provide a stable output voltage regardless of fluctuations in the input voltage.

Conclusion

The SPM15-033-Q48-C is a DC DC converter device designed to provide up to 48 volts of continuous output power from a nominal voltage input of 15 volts. The device consists of two separate converter stages, a primary boost stage and a secondary buck-boost stage. The primary stage provides a high efficiency conversion of the input voltage into the required output voltage, while the secondary stage further fine-tunes it to the specified output voltage. This ensures that the device can provide a smooth and regulated output voltage which is able to remain within the required output voltage range over a wide input voltage range.

The specific data is subject to PDF, and the above content is for reference