SPM5020T-6R8M-LR Inductors, Coils, Chokes

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed Inductors are an important component in the circuit design of electrical and electronic systems. The SP5020T-6R8M-LR is a surface mounted inductor with a rated current of 0.5 Amps, an inductance of 6.8 uH, a tolerance of 10%, and a DC resistance of 0.35 ohms. In this article, we will discuss the application field and working principle of the SP5020T-6R8M-LR.

The SP5020T-6R8M-LR is primarily used in electronics, particularly in frequency ranges from 10 to 100 kHz. Due to its small size, it is often used in portable electronics and digital circuits. It has a good temperature-resistance capacity and can operate at temperatures of up to 125°C. At the same time, it has a wide and flat operating range for high stability over temperature and frequency.

The SP5020T-6R8M-LR inductor works by producing a magnetic field when current passes through it. According to Faraday’s Law of Electromagnetic Induction, the magnitude of current induced in a coil is proportional to the rate of change of magnetic flux through its cross-section. Therefore, as the current passing through an inductor increases, it produces a larger magnetic field, and consequently the opposing voltage also increases. This phenomenon is known as inductance.

Inductors are commonly used in circuitry to filter AC signals and store energy, or to generate a delayed voltage response. The SP5020T-6R8M-LR is used as a filter in applications such as in audio amplifiers, and it is also used to limit the current in a circuit. It can also be used for snubber circuitry to temporarily absorb the energy from a switching circuit, thus limiting the flyback voltage.

The SP5020T-6R8M-LR is also commonly used as part of a resonant circuit, which produces an oscillating output when a frequency is applied. In this application, the inductor works with a capacitor to generate a LC resonance circuit to produce a desired frequency. That frequency can then be used for a variety of purposes, such as for wireless transmission.

The SP5020T-6R8M-LR inductor can also be used for RF signal transmission in a wide range of frequencies. It works by storing and releasing energy within a circuit so as to be able to transmit signals. In this application, it is essential that the inductor is able to store enough energy to allow for the modulation of signals.

The SP5020T-6R8M-LR is also commonly used in power supplies and battery charging. The inductor helps to store energy and regulate the flow of current in a power supply. This is essential to ensure that the power supply is able to provide the correct amount of current for the device it is powering. The SP5020T-6R8M-LR is also used in battery chargers, where its ability to store energy is essential for charging the battery.

The SP5020T-6R8M-LR is a reliable and versatile fixed inductor that can be used in a variety of applications. Its ability to store energy, provide filtered frequencies, and deliver oscillating signals make it an important component in circuit design. This makes it an ideal choice for different types of circuit designs in a wide range of frequency ranges.

The specific data is subject to PDF, and the above content is for reference