Series:	SQM
Packaging:	Bulk
Part Status:	Active
Resistance:	110 Ohms
Tolerance:	±5%
Power (Watts):	3W
Composition:	Ceramic
Features:	Anti-Arc, Flame Proof, Moisture Resistant, Safety
Temperature Coefficient:	±300ppm/°C
Operating Temperature:	-55°C ~ 155°C
Package / Case:	Radial
Supplier Device Package:	Radial Lead
Size / Dimension:	0.472" L x 0.315" W (12.00mm x 8.00mm)
Height - Seated (Max):	1.043" (26.50mm)
Number of Terminations:	2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

Through hole resistors are resistors that are mounted on one end and then routed through a hole in a printed circuit board (PCB) or other electronic component. They are used to provide an electrical connection between the component and the PCB. Through hole resistors are commonly used in combination with other types of resistors, such as surface mount resistors, to create more complex electronic circuits.One of the most common types of through hole resistors is the SQM300JB-110R. This resistor is a high-precision device with an accurate temperature coefficient and a rated strip tolerance of 0.01%. It is a three-terminal device with a 600-ohm resistance that is suitable for applications ranging from audio volume control to active filters. SQM300JB-110R resistors have a number of features, including a corrosion-resistant gold-plated finish, low power loss, and long life.The SQM300JB-110R is specifically designed for use in high-voltage applications. It is able to withstand high temperatures and is capable of dissipating a maximum power of 400mW. It can be used in both single-ended and balanced circuits, and features an insulation Class-F rating. This resistor can also be used in low-current applications, and due to its low power dissipation, it is ideal for use in power supplies and high-frequency circuits.The SQM300JB-110R is constructed with three terminals—a reference (or common) terminal, a gate, and an output. The reference terminal is connected to the ground plane, while the gate and output terminals are connected to their respective resistors. When a voltage is applied to the gate and output terminals, a certain current is generated. The current then flows through the two resistors, causing a voltage drop across them. This resulting voltage drop causes a variation in the resistor’s resistance, which is referred to as the working principle of the resistor. The SQM300JB-110R is ideal for applications such as sound level control, line level attenuation, high-current filtering, and impedance matching. It is also suitable for use in pulse applications, and because of its high heat capacity, it can handle high temperatures without suffering any performance degradation.The SQM300JB-110R is a reliable and accurate resistor for a range of applications. It is available in a range of sizes and wattages and is relatively inexpensive. Its design is well-suited for a variety of applications, and it is reliable enough to withstand a wide range of environmental conditions.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description