Allicdata Part #: | SR5R0400FE66-ND |
Manufacturer Part#: |
SR5R0400FE66 |
Price: | $ 0.25 |
Product Category: | Resistors |
Manufacturer: | Vishay Dale |
Short Description: | RES 0.04 OHM 1% 5W RADIAL |
More Detail: | 40 mOhms ±1% 5W Through Hole Resistor Radial Curre... |
DataSheet: | SR5R0400FE66 Datasheet/PDF |
Quantity: | 1000 |
400 +: | $ 0.22320 |
800 +: | $ 0.16461 |
1200 +: | $ 0.15066 |
5200 +: | $ 0.14374 |
Series: | SR |
Packaging: | Bulk |
Part Status: | Active |
Resistance: | 40 mOhms |
Tolerance: | ±1% |
Power (Watts): | 5W |
Composition: | Wirewound |
Features: | Current Sense |
Temperature Coefficient: | ±300ppm/°C |
Operating Temperature: | -65°C ~ 275°C |
Package / Case: | Radial |
Supplier Device Package: | Radial Lead |
Size / Dimension: | 0.065" Dia x 0.800" L (1.65mm x 20.32mm) |
Height - Seated (Max): | 1.000" (25.40mm) |
Number of Terminations: | 2 |
Failure Rate: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Through Hole Resistors are components used in electronics for electrical resistance. The SR5R0400FE66 is a particular type of through hole resistor that offers a stable voltage and current, higher breakdown voltage, and improved temperature cycling abilities.
Applications of the SR5R0400FE66
One of the primary applications for the SR5R0400FE66 through hole resistor is as a voltage divider. A voltage divider is used in circuits to reduce an input voltage to a specific, desired output. This is done by connecting two or more resistors together. By adjusting the amount of resistance at each junction, the output voltage can be set to whatever is desired. This application of the resistor can be found in a variety of electronic devices, from consumer electronics to industrial controls.
The SR5R0400FE66 is also used as a power isolator. In this application, the resistor is used to isolate electrical circuits from each other. It acts as a buffer between the two circuits to prevent transients and interferences from one circuit from adversely affecting the performance of the other. This kind of resistor is commonly used in medical devices, surveillance equipment, and other devices where electrical noise is a concern.
The SR5R0400FE66 is also popular as an overcurrent protection device. This device is used in power supplies to protect semiconductors and other components from excessive current. The resistor is used to limit the current flowing through the circuit by adding resistance in the form of the resistor. This makes the device ideal for protecting sensitive components from overcurrent or voltage spikes.
The resistor is also used as a load resistor in DC circuits.This type of resistor is used to create a known, steady current through a circuit, allowing for accurate sensing and adjustment of a circuit’s performance and accuracy. This type of application is useful in a variety of applications, including motors, power supplies, and sensors.
Working Principle of the SR5R0400FE66
The SR5R0400FE66 through hole resistor works according to the principle of electrical resistance. Electrical resistance is a measure of the amount of voltage needed to flow through a conductive material. A resistor, such as the SR5R0400FE66, creates an intentional voltage drop in an electrical circuit. This is accomplished by the resistor’s construction. Resistor’s are made up of a metallic nichrome wire that is tightly wound together. As electrons flow through the wire, they encounter resistance from the metallic nichrome wire, causing the voltage to drop. This is what causes the voltage drop in a circuit.
The SR5R0400FE66 offers several advantages over other types of resistors. Firstly, the temperature cycling abilities of the resistor are greatly improved, allowing for greater accuracy and repeatability of the voltage drop. Secondly, the higher breakdown voltage of the resistor makes it more resilient and able to withstand electrical surges without an issue. Finally, the stable voltage and current offered by the SR5R0400FE66 make it ideal for applications that require precise measurements and calculations.
In conclusion, through hole resistors are essential components in any electronic device. The SR5R0400FE66 through hole resistor is a reliable and resilient type of resistor that offers excellent temperature cycling and breakdown voltage characteristics. Additionally, it is most commonly used as a voltage divider, power isolator, current limiter, and load resistor. Its ability to produce accurate, stable voltages and currents make it a popular choice for a variety of applications.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
SR5R0400FE66 | Vishay Dale | 0.25 $ | 1000 | RES 0.04 OHM 1% 5W RADIAL... |
SR5R0100KE66 | Vishay Dale | 0.2 $ | 1000 | RES 0.01 OHM 10% 5W RADIA... |
SR5R0100FE66 | Vishay Dale | 0.47 $ | 1173 | RES 0.01 OHM 1% 5W RADIAL... |
SR5R0220FE66 | Vishay Dale | 0.47 $ | 344 | RES 0.022 OHM 1% 5W RADIA... |
SR5R0200FE66 | Vishay Dale | 0.47 $ | 330 | RES 0.02 OHM 1% 5W RADIAL... |
SR5R0500FE66 | Vishay Dale | 0.49 $ | 328 | RES 0.05 OHM 1% 5W RADIAL... |
RES WW 7W 5% TH68 kOhms 5% 7W Through Ho...
RES WW 7W 5% TH1.3 Ohms 5% 7W Through Ho...
RES 24.9 OHM 1/4W 1% AXIAL24.9 Ohms 1% 0...
RES 2.8 OHM 3W 0.5% WW AXIAL2.8 Ohms 0.5...
RES 750K OHM 1/4W 1% AXIAL750 kOhms 1% 0...
RES 340 OHM 1W 1% WW AXIAL340 Ohms 1% 1W...