Allicdata Part #: | SRF1260A-681MTR-ND |
Manufacturer Part#: |
SRF1260A-681M |
Price: | $ 0.41 |
Product Category: | Inductors, Coils, Chokes |
Manufacturer: | Bourns Inc. |
Short Description: | INDUCT ARRAY 2 COIL 680UH SMD |
More Detail: | Shielded 2 Coil Inductor Array 2.72mH Inductance -... |
DataSheet: | SRF1260A-681M Datasheet/PDF |
Quantity: | 1000 |
1600 +: | $ 0.37346 |
Current Saturation - Series: | 425mA |
Height: | 0.244" (6.20mm) |
Size / Dimension: | 0.492" L x 0.492" W (12.50mm x 12.50mm) |
Package / Case: | Nonstandard |
Mounting Type: | Surface Mount |
Operating Temperature: | -40°C ~ 125°C |
Ratings: | AEC-Q200 |
Shielding: | Shielded |
DC Resistance (DCR) - Series: | 4.635 Ohm Max |
DC Resistance (DCR) - Parallel: | 1.212 Ohm Max |
Series: | SRF1260A |
Current Saturation - Parallel: | 850mA |
Current Rating - Series: | 350mA |
Current Rating - Parallel: | 700mA |
Tolerance: | ±20% |
Inductance - Connected In Series: | 2.72mH |
Inductance - Connected In Parallel: | 680µH |
Number of Coils: | 2 |
Part Status: | Active |
Packaging: | Tape & Reel (TR) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
SRF1260A-681M is a device designed to be used in the application fields which include signal transformers and arrays. It is commonly used in military, aerospace, power industries, communications, and defense systems. This device is made up of a thick film element through which a signal is transmitted and a substrate in which the element is embedded. Its primary characteristics include a high signal-to-noise ratio, large effective impedance, low power consumption, and high sensitivity.
The signal transformer of the SRF1260A-681M is primarily used to amplify the signal voltages when higher voltages are required, in order to compensate for the losses that occur in the transmission of high power signals. This signal transformer is also used to isolate the input and output sides from each other to ensure that any feedback noise generated by the input side does not affect the output. The signal transformers used in the SRF1260A-681M are of two types: resistive and capacitive. The resistive type is typically used for low power signals while the capacitive type is usually used for higher power signals.
The array in the SRF1260A-681M is designed to improve the signal quality by reducing the noise and signal distortion. An array is a group of many identical elements arranged in a grid. Each element is individually designed to eliminate crosstalk between adjacent elements. In the SRF1260A-681M, the array is used to separate the input and output signals which ensures maximum signal integrity and minimum signal interference. The array is made up of an arrangement of resistors, inductors, and capacitors which can be tuned to produce a desired frequency response.
The working principle of the SRF1260A-681M involves the use of two different processes. The first process is the magnetoresistance effect which is used to convert the input signal into electronic form. The second process is the signal transformer which converts electronic signal into a higher voltage signal. This higher voltage signal is then amplified by the array before being sent to the output. This device is designed to provide a high signal-to-noise ratio, low power consumption, and high sensitivity.
To conclude, the SRF1260A-681M is a device designed to be used in the application fields which include signal transformers and arrays. It is capable of providing high signal-to-noise ratio, large effective impedance, low power consumption, and high sensitivity. This device uses a magnetoresistance effect to convert input signals into electronic form, followed by a signal transformer which is used to increase the voltage of these signals. The array is then used to reduce noise and signal distortion, thus providing maximum signal integrity and minimum signal interference.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
SRF1306-350Y | Bourns Inc. | 0.53 $ | 1000 | CMC 35UH 2.7A 2LN 400 OHM... |
SRF1006-472Y | Bourns Inc. | -- | 4000 | CMC 4.7MH 250MA 2LN 6.2 K... |
SRF1006-251Y | Bourns Inc. | 0.42 $ | 4000 | CMC 250UH 1.19A 2LN 400 O... |
SRF1060 C0G | Taiwan Semic... | 0.67 $ | 988 | DIODE SCHOTTKY 60V 10A IT... |
SRF1020 C0G | Taiwan Semic... | 0.25 $ | 1000 | DIODE ARRAY SCHOTT 20V IT... |
SRF1030 C0G | Taiwan Semic... | 0.25 $ | 1000 | DIODE ARRAY SCHOTT 30V IT... |
SRF1040 C0G | Taiwan Semic... | 0.25 $ | 1000 | DIODE ARRAY SCHOTT 40V IT... |
SRF1620 C0G | Taiwan Semic... | 0.26 $ | 1000 | DIODE ARRAY SCHOTT 20V IT... |
SRF1630 C0G | Taiwan Semic... | 0.26 $ | 1000 | DIODE ARRAY SCHOTT 30V IT... |
SRF1640 C0G | Taiwan Semic... | 0.26 $ | 1000 | DIODE ARRAY SCHOTT 40V IT... |
SRF1020HC0G | Taiwan Semic... | 0.27 $ | 1000 | DIODE ARRAY SCHOTT 20V IT... |
SRF1030HC0G | Taiwan Semic... | 0.27 $ | 1000 | DIODE ARRAY SCHOTT 30V IT... |
SRF1040HC0G | Taiwan Semic... | 0.27 $ | 1000 | DIODE ARRAY SCHOTT 40V IT... |
SRF1050 C0G | Taiwan Semic... | 0.28 $ | 1000 | DIODE ARRAY SCHOTT 50V IT... |
SRF1620HC0G | Taiwan Semic... | 0.29 $ | 1000 | DIODE ARRAY SCHOTT 20V IT... |
SRF1630HC0G | Taiwan Semic... | 0.29 $ | 1000 | DIODE ARRAY SCHOTT 30V IT... |
SRF1640HC0G | Taiwan Semic... | 0.29 $ | 1000 | DIODE ARRAY SCHOTT 40V IT... |
SRF1650 C0G | Taiwan Semic... | 0.29 $ | 1000 | DIODE ARRAY SCHOTT 50V IT... |
SRF1660 C0G | Taiwan Semic... | 0.29 $ | 1000 | DIODE ARRAY SCHOTT 60V IT... |
SRF1690 C0G | Taiwan Semic... | 0.29 $ | 1000 | DIODE ARRAY SCHOTT 90V IT... |
SRF10200 C0G | Taiwan Semic... | 0.52 $ | 1000 | DIODE, SCHOTTKY, STANDARD... |
SRF10200HC0G | Taiwan Semic... | 0.52 $ | 1000 | DIODE, SCHOTTKY, STANDARD... |
SRF1306-101Y | Bourns Inc. | 0.58 $ | 1000 | LINE FILTER 50VDC 700MA C... |
SRF1306-102Y | Bourns Inc. | 0.58 $ | 1000 | LINE FILTER 50VDC 350MA C... |
SRF1306-251Y | Bourns Inc. | 0.58 $ | 1000 | LINE FILTER 50VDC 600MA C... |
SRF1306-501Y | Bourns Inc. | 0.58 $ | 1000 | LINE FILTER 50VDC 400MA C... |
SRF1260-101M | Bourns Inc. | 0.5 $ | 13600 | INDUCT ARRAY 2 COIL 100UH... |
SRF1260-220M | Bourns Inc. | -- | 6800 | INDUCT ARRAY 2 COIL 22UH ... |
SRF1280-220M | Bourns Inc. | -- | 6400 | INDUCT ARRAY 2 COIL 22UH ... |
SRF1260-6R8Y | Bourns Inc. | 0.5 $ | 9200 | INDUCT ARRAY 2 COIL 6.8UH... |
SRF1260-330M | Bourns Inc. | 0.5 $ | 7200 | INDUCT ARRAY 2 COIL 33UH ... |
SRF1260-820M | Bourns Inc. | 0.5 $ | 3600 | INDUCT ARRAY 2 COIL 82UH ... |
SRF1260-150M | Bourns Inc. | 0.5 $ | 6400 | INDUCT ARRAY 2 COIL 15UH ... |
SRF1260-221M | Bourns Inc. | 0.5 $ | 3200 | INDUCT ARRAY 2 COIL 220UH... |
SRF1260-100M | Bourns Inc. | -- | 2800 | INDUCT ARRAY 2 COIL 10UH ... |
SRF1260-470M | Bourns Inc. | 0.5 $ | 3600 | INDUCT ARRAY 2 COIL 47UH ... |
SRF1260-4R7Y | Bourns Inc. | -- | 3200 | INDUCT ARRAY 2 COIL 4.7UH... |
SRF1280-221M | Bourns Inc. | -- | 6000 | INDUCT ARRAY 2 COIL 220UH... |
SRF1280-4R7Y | Bourns Inc. | -- | 1000 | INDUCT ARRAY 2 COIL 4.7UH... |
SRF1280-100M | Bourns Inc. | 0.65 $ | 1000 | INDUCT ARRAY 2 COIL 10UH ... |
INDUCT ARRAY 2 COIL 170NH SMDUnshielded ...
INDUCT ARRAY 2 COIL 677.4UH SMDShielded ...
INDUCT ARRAY 2 COIL 5.7UH SMDUnshielded ...
INDUCT ARRAY 2 COIL 820UH SMDShielded 2 ...
INDUCT ARRAY 2 COIL 470UH SMDShielded 2 ...
INDUCT ARRAY 2 COIL 220UH SMDShielded 2 ...