SRF16100HC0G

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SRF16100HC0G is a member of the Diodes—Rectifiers—Arrays family. It is a common type of power management component which is frequently used in various applications.

SRF16100HC0G features a common anode, a five-diode array and 2 lines. It is designed to support high current applications and provides a wide range of protection features.

The components provide a low forward voltage drop and have a typical forward voltage of 3.2 V. The maximum forward voltage is 3.5 V, while the maximum reverse voltage is 100 V. The forward current is rated at 16 A while the reverse current is limited to 100 μA. Additionally, the junction temperature is rated at 175°C and the package is SMP.

SRF16100HC0G is used for a variety of power management applications such as automotive, computers, and consumer electronics. Common uses include power supplies, battery chargers, relay drivers, and uninterruptible power supplies.

In automotive applications, SRF16100HC0G rectifiers are used for noise suppression and to provide over-voltage and over-current protection for the vehicle\'s circuits. In consumer electronics applications, SRF16100HC0G rectifiers are often used as a regulator, providing over-current and over-voltage protection.

When used in power supplies, the rectifiers are typically placed in the negative or positive line to provide input protection and noise suppression. In PSU’s, they protect against both over-voltage and under-voltage. In battery chargers, they provide power surge protection and allow the current to be controlled accurately.

The working principle of the SRF16100HC0G rectifier is relatively simple. When a voltage is applied across the component, the current will flow from the anode to the cathode. If the voltage is greater than the forward voltage of the component, the current will flow through the junction. At the same time, there is also a reverse current that flows from the cathode to the anode in the opposite direction.

When used in applications where the current might exceed 16 A, the component must be sized appropriately and an external resistor should be considered to control the reverse current. Additionally, the component should be placed on a heat sink as it can dissipate up to 20W of power due to its high forward current.

In conclusion, the SRF16100HC0G is a popular power management component which is suitable for a variety of applications. It features a low forward voltage drop, a high maximum forward current rating, and a low maximum reverse current. Additionally, the component is designed to provide over-voltage and over-current protection, providing protection for the circuits it regulates.

The specific data is subject to PDF, and the above content is for reference