SRP4012TA-R60M

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed inductors are passive components commonly used for many applications in radio frequency (RF) and high frequency (HF) electronics. One type of fixed inductor is the SRP4012TA-R60M. This article will discuss the application field and working principle of the SRP4012TA-R60M.

The SRP4012TA-R60M is a 12.5mm square, 600nH, 0.48Ohm, 67 MHz, double side inductor. It has a high Q value for use in RF and HF signal filters, for which its excellent frequency stability and variable characteristics make it well suited. It can also be used as a matching element in high-power RF and HF systems, such as industrial automation and communications devices.

The SRP4012TA-R60M is a low-profile, double-sided inductor with a maximum height of 6.3mm and a total length of 15mm. It has a miniaturized, uncomplicated construction, which makes it easy to integrate into high-density applications. Its low capacitance also makes it suitable for use in high-speed switching applications. Its dual layer-Structure, strong thermal has high power handling capacity.

In terms of performance, the SRP4012TA-R60M has high Q-factor, low DC resistance, low AC resistance, and low current noise. Its power rating is rated at 500W, and it operates at a frequency of up to 67 MHz. Additionally, it has a typical tolerance of 5%, and its inductance range is from 400 to 700 nH.

The working principle of the SRP4012TA-R60M is based on Faraday’s law. This law states that a current flowing in a closed circuit forms an electrical field. The current flows through the SRP4012TA-R60M as a conductor, generating an electrical field that acts on the magnetic materials in the device, magnetizing it. This creates an opposing magnetic field, which acts on the current in the circuit, slowing it down, which creates the inductance. As the current is reduced, the inductance of the device increases. As the current increases, the inductance is reduced.

In addition, the SRP4012TA-R60M also has a self-resonant frequency, which is the frequency at which the impedances of the inductor and the capacitor are equal. It is usually the highest frequency at which the inductor could be used. This frequency is determined by the inductance value of the coil and the capacitance value of the winding.

In conclusion, the SRP4012TA-R60M is a low profile, fixed inductor with a 600 nH inductance and a 0.48 Ohm DC resistance. It is commonly used in RF and HF signal filters, as a matching component in industrial automation and communication devices, and as a switching element in high-speed switching applications. Its operation is based on Faraday’s law, and it has a self-resonant frequency which determines its frequency range.

The specific data is subject to PDF, and the above content is for reference