SRP6050CA-1R5M Inductors, Coils, Chokes

Q @ Freq:	--
Height - Seated (Max):	0.197" (5.00mm)
Size / Dimension:	0.260" L x 0.252" W (6.60mm x 6.40mm)
Supplier Device Package:	--
Package / Case:	Nonstandard
Mounting Type:	Surface Mount
Features:	--
Inductance Frequency - Test:	100kHz
Operating Temperature:	-55°C ~ 155°C
Ratings:	AEC-Q200
Frequency - Self Resonant:	40MHz
Series:	SRP6050CA
DC Resistance (DCR):	6.3 mOhm Max
Shielding:	Shielded
Current - Saturation:	19.5A
Current Rating:	17A
Tolerance:	±20%
Inductance:	1.5µH
Material - Core:	Iron Powder
Type:	Wirewound
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Fixed inductors are electronic components that convert electrical energy from the alternating current (AC) to direct current (DC). They consist of an inductor, usually consisting of a coil of wire, a core, and an electrical field which constrain the current and the magnetic field generated within the inductor to remain constant. The SRP6050CA-1R5M Inductor is one such component, and offers a wide range of applications for many different kinds of electronic devices.

Applications of SRP6050CA-1R5M

The SRP6050CA-1R5M Inductor is a type of surface mount fixed inductor. It is made with an even distribution of ferrite core material. This part is rated for an operating temperature of -40°C to +125°C. The SRP6050CA-1R5M is well suited for AC and DC current applications such as power line noise interference suppression, high-frequency signal suppression, power line filters, and sawtooth wave interference suppression. The SRP6050CA-1R5M Inductor is suitable for a wide range of applications in the automotive, telecom, industrial, and consumer electronics due to its low DC resistance and high current capacity. They are used to filter low frequency and high frequency noise in automotive electronics, such as power line filters in automotive power systems, and sawtooth wave interference suppression. The inductor is also used in cell phone antennas, and is an ideal choice for high frequency signal suppression and low frequency noise reduction in mobile handsets. In addition, the SRP6050CA-1R5M Inductor is used in switch mode power supplies (SMPS), voltage controlled switching circuits, and other power supply applications where choke coils are used. It is also used to suppress voltage spikes along with other components such as capacitors in power management systems.

Working Principle of SRP6050CA-1R5M

The working principle of the SRP6050CA-1R5M Inductor is based on inductance. Inductors rely on impedance, the measure of the opposition to alternating current, to create an EMF, or electrical field. When current is passed through the inductor, an oscillating field is created. This oscillating field, extending out from the inductor is called the magnetic flux. The SRP6050CA-1R5M Inductor is a type of surface-mount inductor that contains an even distribution of ferrite core material. This ferrite core creates an increased inductance, which enables the inductor to pass higher current and produce enhanced current margin values than other types of inductors, such as air core inductors.The SRP6050CA-1R5M Inductor is designed to maintain a constant EMF, or electrical field, throughout its working range. This is achieved through a combination of the ferrite core material and its impedance characteristics. Its design also allows for high levels of current flow and an extremely low DC resistance, which is why it is particularly well-suited for use in DC and AC current applications.When the SRP6050CA-1R5M Inductor is used in AC and DC current applications, it acts as a filter to reduce the amount of unwanted noise created by the alternating current. This helps to reduce the amount of interference generated by power supplies and other electronics, leading to improved performance and enhanced system reliability.

Conclusion

The SRP6050CA-1R5M Inductor is a surface mount fixed inductor that is suitable for a wide range of applications in the automotive, telecom, industrial, and consumer electronics fields. The inductor is well suited for AC and DC current applications, and works to reduce the amount of unwanted noise created by alternating currents. It is a reliable component that offers superior performance and high levels of current flow, all within an extremely low DC resistance range.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description