SRR1260A-7R6Y

DC Resistance (DCR):	19 mOhm Max
Height - Seated (Max):	0.256" (6.50mm)
Size / Dimension:	0.492" L x 0.492" W (12.50mm x 12.50mm)
Supplier Device Package:	--
Package / Case:	Nonstandard
Mounting Type:	Surface Mount
Inductance Frequency - Test:	100kHz
Operating Temperature:	-40°C ~ 125°C
Ratings:	AEC-Q200
Frequency - Self Resonant:	27.9MHz
Q @ Freq:	16 @ 7.96MHz
Series:	SRR1260A
Shielding:	Shielded
Current - Saturation:	6.2A
Current Rating:	6A
Tolerance:	±30%
Inductance:	7.6µH
Material - Core:	Ferrite
Type:	--
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed Inductors: SRR1260A-7R6Y Application Field and Working Principle

Inductors are electrical components that store energy in the form of a magnetic field and release it as electrical current. Inductors have many applications in electronics, from creating effective filters in analog audio circuits to providing high-power transfer in electric motors. The SRR1260A-7R6Y is a type of fixed inductor, meaning that its inductance cannot be dynamically adjusted internally. With this in mind, there are many applications that the SRR1260A-7R6Y can be applied to.The SRR1260A-7R6Y is a radial, leaded inductor with a peak current rating of 8.5A and an inductance of 7.6nH. This type of inductor is commonly used in switching power supplies to reduce output noise and efficiently transfer power from the input to the output. Power supplies require inductors to bridge the gap between zero and higher voltage power sources. Inductors act as shields and provide current filtering, protecting the load from voltage surges and drops. This allows for a consistent output voltage across the board.The SRR1260A-7R6Y inductor is ideal for applications where high current and low inductance are vital. It can be used in a wide range of electronic circuits, from RF oscillators to Buck Converters. In RF applications, inductors can be used to filter out unwanted noise or amplify signals, depending on the design. Buck converters use inductors to regulate the output voltage and current, thus providing an efficient and effective power supply solution.In order to understand the working principle of the SRR1260A-7R6Y, it is important to understand the basics of inductors. Inductors are essentially two coils of wire. When electric current passes through the first coil, it generates a magnetic field. This magnetic field then induces an electric current in the second coil. The electric current produced in the second coil is proportional to the strength of the magnetic field and the rate at which the current is changing. This process is known as induction or Faraday’s Law.In the case of the SRR1260A-7R6Y, the primary coil is made of copper wire and the secondary coil is made of air or blank space. The reason the blank space is used is that it does not provide any resistance to the magnetic field, allowing the inductor to operate more efficiently. The current that is induced in the secondary coil is proportional to the rate of change of the current in the primary coil. This means that if the current in the primary coil increases rapidly, then the current in the secondary coil will also increase, but at a slower rate. This is why the SRR1260A-7R6Y is ideal for power supplies, as current filtering is important.The SRR1260A-7R6Y is a versatile, reliable, and cost-effective fixed inductor that can be used in a wide range of electronic applications. Its small size and high current-handling capabilities make it ideal for use in power supplies, RF applications, and more. The SRR1260A-7R6Y can provide clean, consistent power to any circuit and is an excellent choice for any system designer.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description