SRR5028-2R6Y Inductors, Coils, Chokes

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Inductors are critical components in many electrical or electronic circuits, and are used for many different purposes. The SRR5028-2R6Y is a fixed inductor, meaning that its inductance is predetermined and comes factory set, and it is usually integrated into a board or device to perform its intended function. While the SRR5028-2R6Y has an application field that is somewhat different, it still plays an important role in electronic circuits. It can be used in electric field sensing, power filter circuits, low pass filters, and as a noise suppressor. It can also be used as part of an oscillating loop, for controlling low-level interference, and as an ASK modulator.

The SRR5028-2R6Y is designed for applications that require high-quality inductors with low DCR and thermal resistance. It has an inductance of 2.6µH and a maximum DCR of 0.055 ohm. Its high inductance and low DCR make it suitable for use in a variety of circuits, including power supplies, high power filters, noise suppression circuits, and inductive-division networks. In addition, it has a high self-resonant frequency (SRF) of 15MHz that can help to reduce noise and improve the overall performance of a device.

The working principle of an inductor is based on Faraday\'s Law. Faraday\'s Law states that when a conductor moves through a magnetic field, an electric current is generated in the conductor. This current, and the associated flux, induces a voltage across the conductor. When an inductor is placed in a circuit, the current flowing through it creates a magnetic field that opposes any changes in the current, resulting in a voltage drop. This voltage drop is called Inductance. Inductance is defined as the ratio of the voltage across the inductor to the current flowing through it. The SRR5028-2R6Y has an inductance of 2.6µH, which means that a voltage drop of 2.6µV will be induced for every ampere (A) of current flowing through it.

In practical terms, the SRR5028-2R6Y is used as part of a circuit to filter unwanted noise. When the frequency of a signal is higher than the self-resonant frequency (SRF) of the SRR5028-2R6Y, the inductor will act as a low-pass filter and attenuate the signal. Conversely, the SRR5028-2R6Y will act as a high-pass filter when the frequency of the signal is lower than the SRF. In either case, the filter will help to reduce unwanted noise and improve the overall performance of the circuit.

In conclusion, the SRR5028-2R6Y is a fixed inductor that is designed for use in a variety of circuits, including electric field sensing, power filter circuits, low pass filters, and ASK modulators. Its high inductance and low DCR make it suitable for use in applications where high-quality inductors are needed. Its high SRF helps to reduce noise and improve the overall performance of the circuit, making it an ideal choice for noise suppression.

The specific data is subject to PDF, and the above content is for reference