SRR6028-100Y Inductors, Coils, Chokes

DC Resistance (DCR):	65 mOhm Max
Height - Seated (Max):	0.118" (3.00mm)
Size / Dimension:	0.268" L x 0.268" W (6.80mm x 6.80mm)
Supplier Device Package:	--
Package / Case:	Nonstandard
Mounting Type:	Surface Mount
Inductance Frequency - Test:	100kHz
Operating Temperature:	-40°C ~ 125°C
Ratings:	--
Frequency - Self Resonant:	25MHz
Q @ Freq:	11 @ 2.52MHz
Series:	SRR6028
Shielding:	Shielded
Current - Saturation:	1.7A
Current Rating:	2A
Tolerance:	±30%
Inductance:	10µH
Material - Core:	Ferrite
Type:	Wirewound
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed Inductors are electrical components consisting of one or more windings of wire. They act as electromagnetic energy storage devices, meaning they can store energy momentarily when a current is flowing through it and discharge it when the current is removed. In this article, we will take a look at the application field and working principle of the fixed inductor labeled SRR6028-100Y.The SRR6028-100Y is a high-current common-mode inductor. It has a rated current of 0.3A, an inductance rating of 100µH, and after-reflow solderability of 1.3mm from the component body. Its application fields include consumer electronics, power supplies, and automotive.As far as any fixed inductor’s working principle is concerned, it uses inductance to store and convert electrical energy into magnetic energy. The inductance of a fixed inductor is proportional to the number of turns in the coil’s winding and the magnetic core’s magnetic permeability. The inductance of a fixed inductor is measured in Henries and is defined as the rate of change of the current in the coil with respect to the time.The general principle of operating an inductor is such that when the current flow through it increases, it induces a magnetic field around the component and the magnetic field in turn, creates a back-emf, or an opposing force, which acts against the flow of current. This magnetic field helps the inductor to store the energy as potential energy. As the current increases, the magnetic field also increases and so does the amount of energy stored.When the current is decreased, the reverse happens: the magnetic field decreases and so does the amount of energy stored. This decrease in the magnetic field creates a back-emf, which opposes the flow of current and decreases the amount of energy converted into the magnetic field. When the current is again increased, the back-emf and the decrease in the magnetic field helps the energy to be converted back into current.The SRR6028-100Y, which is a fixed inductor, follows the same working principle as described above. It is designed to withstand frequent current changes and store more energy than other comparable inductors available on the market. It is ideal for use in consumer electronics, power supplies and automotive applications due to its high current rating, 0.3A, and its relatively low size, which make it ideal for places with limited space.Overall, the SRR6028-100Y is a high-current common-mode inductor that is ideal for consumer electronics, power supplies, and automotive applications. It has an inductance of 100µH and a rated current of 0.3A. Its working principle is based on the fact that it uses inductance to store and then convert electrical energy into magnetic energy, which then creates an opposing force and decreases the amount of energy transferred into the magnetic field. Its small size plus its high-current rating makes it an ideal product for places with limited space.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description