SS12L R3G Discrete Semiconductor Products

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes are an electrical component that easily allow the flow of current in one direction, while difficult or preventing current from flowing back in the opposite direction. Rectifiers are electronic circuits that convert alternating current (AC) to direct current (DC). Single is a type of rectifier which consists of a single diode connected to a load. An SS12L R3G is a single rectifier which has many applications in circuits where a conversion from AC to DC is necessary.

The SS12L R3G has a maximum repetitive reverse voltage of 600V and a maximum forward, non-repetitive surge surge current of 30A. It is a low-power rectifier with a low voltage drop. It has a Vf rating of 1.1V at IF = 3A and Irm of 0.75A. It has a recovery time of 250ns maximum and a junction temperature of 175°C.

One of the most common applications of the SS12L R3G is in AC-to-DC converters. It is suitable for a wide variety of AC-to-DC applications, including in transformers, motors and appliances. In these applications, the SS12L R3G single rectifier is used to convert the incoming AC voltage supply to the desired DC voltage output.

The SS12L R3G can also be used in bridge rectifier circuits. These circuits are commonly used to convert alternating current to direct current. A bridge rectifier circuit is composed of four diodes arranged in a so-called ‘bridge’ configuration. The SS12L R3G can be used in place of one of the four diodes in the bridge rectifier circuit.

Another application of the SS12L R3G is in high-frequency circuits. This type of circuit is designed to pass high-frequency signals without significant attenuation. The SS12L R3G single rectifier can be used in the power supply section of high-frequency circuits, providing a DC power supply to the active components of the circuit.

The working principle of the SS12L R3G is simple. When a forward voltage is applied to the diode, the diode becomes forward biased and current flows through it. Conversely, when a reverse bias voltage is applied to the diode, it becomes reverse biased and no current flows through it. This is the basis of current flow in the rectifier.

In brief, the SS12L R3G is a single rectifier which has many applications in AC-to-DC converter circuits, bridge rectifier circuits, and high-frequency circuits. The working principle of the SS12L R3G is based on the fact that a diode only allows current to flow in one direction when a forward bias is applied, and no current to flow when a reverse bias is applied.

The specific data is subject to PDF, and the above content is for reference