ST16C450IJ44-F

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The ST16C450IJ44-F is an interface-UART (Universal Asynchronous Receiver Transmitter) chip manufactured by STMicroelectronics. It is an integrated modem and serial-interface chip that operates in full-duplex mode, allowing communication between two devices or connection to a larger LAN (Local Area Network). The chip\'s key features include an integrated Central Processing Unit (CPU), an integrated Serial Port Interface (SPI), a Clock and Data Rate selector, a data rate of 0 - 115.2 kbps, and a 64 byte FIFO buffer.

ST16C450IJ44-F has two types of application field. Firstly, it is mainly used in the computer-controlled or terminal-based environment. In this case, it is used to create and control RS-232/216 communication interface for connecting between two devices. Secondly, it is also used in data acquisition, data logging, printer control and UART based applications. The applicability of this chip ranges from low- to high-end host-based applications, such as telecommunication, automotive, industrial and consumer electronics.

The ST16C450IJ44-F chip is the combination of the UART device and the serial-communication port, both of which work with minimal external components. The UART device operates in the asynchronous protocol, meaning it does not require a dedicated clock source, but depends on two pins to carry data signals. One receives data (RXD) while the other transmits data (TXD). The chip also employs flow-control techniques in order to guarantee data integrity by ensuring that data is not lost. To receive data, the ST16C450IJ44-F chip controls the RTS pin (Request to Send) and the CTS pin (Clear to Send).

The serial port on the other hand, works in two transfer modes: synchronous mode and asynchronous mode. In synchronous mode, the serial port sends a block of serial data as one set, with each set comprising a preamble and postamble. The preamble contains information about the length and type of data being sent, and is used to synchronize the transfer; the postamble contains a checksum and is used to ensure the integrity of the data. Asynchronous mode on the other hand, sends serial data in discrete bytes, using start and stop bits to indicate the beginning and end of the packet, and a parity bit to detect bit errors.

The ST16C450IJ44-F supports both synchronous and asynchronous modes of data transfer. This feature helps increase reliability, reduce consumption of resources and support faster data speeds, since the overhead associated with transmitting and receiving data is minimized. In addition, the chip\'s on-board Switch Media Access Controller (MAC) offers an interface for controlling, streaming and error correction allowing for higher data speeds. With a number of other benefits such as higher data speeds and improved reliability, the ST16C450IJ44-F is suitable for various UART based applications.

The specific data is subject to PDF, and the above content is for reference