ST16C654IJ68-F

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The ST16C654IJ68-F interface is classified as part of the UARTs, or universal asynchronous receivers and transmitters. UARTs are commonly used in computer systems and communication networks, as they serve to transmit data between devices. The ST16C654IJ68-F, in particular, is a transceiver that handles the electrical signaling for cellular mobile networks.

The ST16C654IJ68-F is designed to be highly reliable, featuring a robust I/O interface, burst mode data transmission, and an 8-bit UART data integrity check. It is particularly well-suited for situations with limited space and power requirements, as its size is minimized, and its power usage is lower than other competitor components. The device operates at temperatures between –40°C and +85°C, and its current consumption is just 10mA.

The ST16C654IJ68-F has a highly optimized design that helps to support fast data transmission modes over the 10 MHz frequency band. It features integrated signal and power conditioning circuits, and works with GSM, EDGE, and GPRS/GSM standards. The device also supports short-hand signaling methods, and supports split burst transmission of up to 2.5 Mbps.

The ST16C654IJ68-F has an integrated analog-to-digital converter, which is responsible for the conversion of the digital signal into an analogue signal. This is necessary in order to enable the device to transmit data over the low-level radio frequency air interface. The device also features a Digital Signal Processor, which helps to support the modulation and coding schemes implemented in the system, as well as for error correction.

The ST16C654IJ68-F is designed to work with external serial interfaces, specifically either RS-232 or RS-485. It connects with external peripherals via the TxD and RxD pins, which are designed to handle data in both directions. It offers loopback testing capabilities and break detection control. Furthermore, it supports software reset and auto-baud rate detection.

In addition to the TxD and RxD data lines, the device also contains a DCD, CTS, and RTS status lines, which allow the device to determine the availability of an external peer device. These lines provide feedback to the device, which will then proceed to transfer data as required. The RxD and TxD lines can operate over a single line, with the device dynamically switching between transmit and receive mode as needed.

To summarize, the ST16C654IJ68-F interface is part of the UARTs, or universal asynchronous receivers and transmitters. It is designed specifically to support GSM, EDGE, and GPRS/GSM standards, and works with external serial interfaces, including RS-232 and RS-485. It is optimized for fast data transmission modes and features integrated analog-to-digital conversion and Digital Signal Processor. Moreover, it contains status lines that allow the device to determine the availability of an external peer device.

The specific data is subject to PDF, and the above content is for reference