STK581U3C0D-E

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The STK581U3C0D-E is classified as a PMIC (Power Management IC), specially a Motor Driver, Controller. It is used to control the voltage, current, and the speed of the motor, or the system in general, usually for the applications that require a stable and efficient power supply.

The STK581U3C0D-E’s operating voltage is from 2.7 V to 5.5 V, within which the motor runs with a speed of up to 1 MHz. It has two independent channels with a common control. It offers a wide range of output current - from 8 mA to 500 mA for each channel, making it an ideal choice for high power applications. It also features a three-phase commutator that can reduce the power loss generated by the motors.

The STK581U3C0D-E features two input signals: one is a pulse-width-modulated (PWM) signal, and the other is a low-voltage digital signal. The PWM signal determines the speed of the motor, while the digital signal controls the commands of the motor. It also has an adjustable standby function that allows the chip to start up in different operating modes according to the specific application.

The main application field of the STK581U3C0D-E is motor control, especially in providing a constant and efficient supply of power to the motors in appliances and systems such as air-conditioners, refrigerators and washing machines. It is also commonly used for light, electric locks, microwaves, and other electric appliances. Additionally, it can be used for general electrical applications and industrial automation with electric motor control.

The STK581U3C0D-E operates based on the principle of pulse-width modulation. When the PWM signal is applied, the voltage source switches the current to the motor by switching off the current in response to a regular, recurring pulse. This process repeats continuously and results in an average voltage that is proportional to the duty cycle in the PWM signal. By changing the duty cycle of the PWM signal, the speed of the motor can be controlled.

The low-voltage digital signal activates the Stop and Run commands, as well as the Standby mode. It triggers the output of the pulse-width modulation signal by turning on the logic pin, proceeding to the Start Signal. The logic controlled current sink has two configured states: logic low, which is the Start Signal, and logic high, which is the Stop Command.

The STK581U3C0D-E is a popular motor driver, controller and is an ideal choice for motor control applications where a stable and efficient power supply is required. It is well suited for use in various domestic, industrial and general electrical applications.

The specific data is subject to PDF, and the above content is for reference