SU10VFC-R10045

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Common Mode Chokes, sometimes referred to as CMC for short, are an important part of any electrical system with higher voltage AC or DC. They are used to help control the passage of electromagnetic fields throughout a system, preventing cross-talk and interference from external sources. The SU10VFC-R10045 is one of the most commonly used types of CMCs, due to its relative simplicity and cost effectiveness.

The SU10VFC-R10045 is a two-wire, split-toroid common mode choke designed for use with low-frequency AC and DC power. The device consists of two separate toroid cores wound in opposite directions and phase angles to reduce or eliminate the common mode voltage and current signals. The symmetrical design helps the SU10VFC-R10045 maintain an equivalent impedance over a wide frequency range, providing outstanding performance. Additionally, the common mode choke is constructed with an external ferrite shell for extra EMC protection.

The SU10VFC-R10045’s applications are primarily in power line filters, harmonic mitigation, and EMI/RFI suppression. When used properly, this device can help filter out undesirable noise and voltage transients, preventing them from disturbing the operation of other equipment, or causing interference with nearby systems. The device is also well-suited for use in multiple-output power supplies and DC/DC converters, suppressing any forms of noise generated from the power supply.

The working principle of the SU10VFC-R10045 is relatively simple. As two current-carrying wires pass through the core material, the common mode current is reduced to a minimum. The cores of the device are designed in such a way that the magnetic fields generated by the current-carrying wires cancel each other out, resulting in a near-zero output. While the magnetic field cancellation does not necessarily nullify the noise, it is reduced to an acceptable level.

In order to ensure that the SU10VFC-R10045 works properly, it is important to use the correct mounting and wiring schemes. These will vary depending on the application, but the most important thing is to ensure that the connection is symmetrical, with both wires connected in the same manner. Additionally, proper spacing must be maintained between the parts of the device to reduce the chance of magnetic interference or false signals.

In summary, the SU10VFC-R10045 is a two-wire, split-toroid common mode choke widely used in power line filters, harmonic mitigation, and EMI/RFI suppression. With its symmetrical design and external ferrite shell, the device is able to maintain an equivalent impedance over a wide frequency range for effective noise reduction. In order to ensure the best performance, it is important to use the correct mounting and wiring schemes.

The specific data is subject to PDF, and the above content is for reference