SY100E164JC

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Logic-signal switches, multiplexers, and decoders are vital components within the electronics field. These components are used to direct, channel, or route data from one signaling source to another, and are essential if one wants to obtain reliable data communication over a network. The SY100E164JC is a specialized IC that is suitable for use in applications where multiplexers, decoders, and switches are necessary. This article discusses the application fields and the working principle for the SY100E164JC.

The SY100E164JC is part of the Emitter-Coupled Logic (ECL) series of devices from Exar Corporation. This device is a high-speed, precision logic switch that can be used in a variety of applications, such as present in a clock and data recovery circuit, where it is used to monitor the data being transmitted on a serial bus and to output a synchronized stream of data to the receiver. The device performs this function by utilizing two separate ECL inputs, and outputting the data it receives on its outputs based on the selected input.

This device is also capable of performing a number of other functions, such as multiplexing, transmitting data from various sources, or one source of data to multiple destinations. It can also perform additional tasks such as dipole decoder logic, where it can detect a logic 0 or logic 1 on a certain input and switch the data output according to the result. This is especially useful when monitoring data over a network.

The device also has an interactive mode, which can be turned on to allow multiple devices to interact and share data. This mode allows the device to recognize commands sent by the other device and respond with data based on the command. This allows communication between multiple devices to be more efficient, especially when used over a network.

The SY100E164JC can also be used in high-speed clock and data recovery applications, where the device is used to monitor the data being transmitted on a serial bus and to output a synchronized stream of data to the receiver. The device operates at speeds up to 3.2GHz with a clock frequency of 1.4GHz. The device is also able to switch data between various frequencies, making it suitable for use in a wide array of communication systems.

The SY100E164JC is also able to function at lower voltages, which makes it ideal for use in low-power applications. Additionally, the device is designed to hold its state even in the event of a power outage, which allows uninterrupted data transmission. The device also has good cross-point isolation, which helps reduce the amount of noise in the signal.

The working principle of the SY100E164JC is based on the transistor-transistor logic (TTL) technique. This technique uses two transistors to control the logic of the output. The device uses two transistors that are connected in series with one another, and the output of each transistor is connected to an output pin. The two transistors are controlled by two separate signals and when a voltage is applied to the gate of one transistor, the corresponding output pins are enabled.

The SY100E164JC is an essential device for use in any system that needs to multiplex, decode or switch signals between different destinations. The device is simple to use and is capable of functioning under a variety of conditions and speeds. The low power consumption of the device increases its suitability for use in portable applications, and the device also has good cross-point isolation, which helps reduce noise in the signal, making it suitable for use in communication systems.

The specific data is subject to PDF, and the above content is for reference