SY100ELT28ZG

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Logic - Translators, Level Shifters

The SY100ELT28ZG logic translator is a versatile tool that simplifies many design tasks. It is used in a variety of applications, including signal conditioning, level shifting, isolation, and drive strength control. It has the ability to operate over a wide range of voltages and frequencies, making it perfect for use in a wide range of applications.

Application field of SY100ELT28ZG

The SY100ELT28ZG is suitable for use in a variety of applications. It can be used to bridge the gap between different kinds of logic signals. For example, it can be used to convert a 3.3V logic signal to a 5V signal, or to convert a 2.5V signal to a 3.3V signal. It can also be used for driving higher voltage signals, such as 24V, from a smaller logic signal such as 5V. This can be especially useful when working with components that use a different logic family than the main logic system. The SY100ELT28ZG can also be used for level shifting circuits, to adjust the level of the input signals and for interface isolation, which prevents noise and ground loops between different parts of a circuit.

Working principles of SY100ELT28ZG

The SY100ELT28ZG logic translator operates by taking one logic signal and translating it into another logic signal. This is accomplished by using a logic table that defines the logic input and output levels. The translator has two inputs and two outputs. When the logic at the input is high, the output will be low, and when the logic at the input is low, the output will be high. This allows the translator to convert a signal from one logic family to another.

The translator also has several voltage level inputs and outputs, and these can be used for level shifting purposes, or for isolation. The logic input levels are adjustable, so the translator can be set to use different logic levels depending on the application. The translator also has an enable input, which can be used to shut off the translator.

The SY100ELT28ZG translates between a wide range of logic families, including TTL, ECL and CMOS, and can be used for driving CMOS and TTL signals at up to 28V. This makes it perfect for a wide range of applications, such as providing isolation, interfacing with different logic families, and level shifting.

The specific data is subject to PDF, and the above content is for reference