SY100H606JC-TR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SY100H606JC-TR is part of an integrated circuit family classified as Logic - Translators, Level Shifters. This particular integrated circuit allows for two logic families to interface and is known for its high-reliability, low power consumption and small footprint. The SY100H606JC-TR is based on the TTL logic circuitry which features the capability of operating at a higher frequency and therefore allows for faster data transfer between different circuitry types.

The SY100H606JC-TR integrated circuit has multiple application fields. When used with a voltage divider, this integrated circuit can be used as a level shifter, allowing for 5V CMOS to interface with 3.3V aso circuits. This can be scaled as needed depending on the device of choice and the schematic around the level shifter when used in this capacity. This chip can also be used for converting logic levels of low-voltage logic family down to a lower logic voltage level and allowing for logic levels of two different families to transfer data.

The working principle of the SY100H606JC-TR is relatively simple. The chip is made up of two separate circuit blocks that act as the input and output ports of the chip. The input port is connected to the Vcc supply voltage (typical voltage is 5V) while the output port is connected to the output voltage (typical voltage is 3.3V). Data is then input through the input port and then level shifted to the output port by the integrated circuitry inside the chip.

The main components of the SY100H606JC-TR are a basic NAND gate and a P-channel MOSFET. The NAND gate serves as the gate for the MOSFET, whose source is connected to the output voltage and whose drain is connected to the output port. The NAND gate is used to control the triggering of the MOSFET and thereby is responsible for the level shifting of data from the input port to the output port. After level shifting, the data is presented at the output port and the NAND gate automatically switches off the MOSFET, ready to begin the process again.

The SY100H606JC-TR integrated circuit is an extremely handy and important piece of technology, allowing for the interfacing between logic families of different voltages. By being able to reliably switch between the two logic families, it enables fast and efficient data transfer, while also taking up a very small footprint. With its low power consumption, the SY100H606JC-TR is an integrated circuit which is sure to see the continued use in the future.

The specific data is subject to PDF, and the above content is for reference