Allicdata Part #: | SY10E122JC-ND |
Manufacturer Part#: |
SY10E122JC |
Price: | $ 0.00 |
Product Category: | Integrated Circuits (ICs) |
Manufacturer: | Microchip Technology |
Short Description: | IC BUF NON-INVERT -5.5V 28PLCC |
More Detail: | Buffer, Non-Inverting 9 Element 1 Bit per Element ... |
DataSheet: | SY10E122JC Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | 10E |
Packaging: | Tube |
Part Status: | Discontinued at Digi-Key |
Logic Type: | Buffer, Non-Inverting |
Number of Elements: | 9 |
Number of Bits per Element: | 1 |
Input Type: | -- |
Output Type: | Push-Pull |
Current - Output High, Low: | -- |
Voltage - Supply: | -4.2 V ~ -5.5 V |
Operating Temperature: | -40°C ~ 85°C (TA) |
Mounting Type: | Surface Mount |
Package / Case: | 28-LCC (J-Lead) |
Supplier Device Package: | 28-PLCC (11.5x11.5) |
Base Part Number: | 10E122 |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The SY10E122JC belongs to the family of Logic-Buffers, Drivers, Receivers, Transceivers, and it is a low-voltage complementary metal-oxide semiconductor (CMOS) quad bus-interface circuit containing four independent non-inverting buffers.
The purpose of the SY10E122JC is to provide a high-current, low-power drive capability from a 5-volt CMOS logic output. The device has one low-active output enable/disable control and four outputs for bus-oriented applications, such as for an Edge Card Connector or a ribbon cable interface. The symmetry of the SY10E122JC allows the same interface to be used for either an input or an output. This combination makes it ideal for use in applications where there is a need to drive high capacitive loads, such as long cables and the like.
The working principle of the SY10E122JC is quite simple. When connected to a 5-volt CMOS logic board, the four outputs are activated by the input voltage, typically between 0.8V and 3.3V. When the voltage is greater than 0.8V, the output is high. When the voltage is less than 0.8V, the output is low, creating a logic one level. The device is designed to provide a low power drive with a 20mA output current. A low-active output enable/disable feature keeps the four outputs from being actuated until the device is enabled. This makes the device ideal for applications where current must be conserved, such as when the device is used for bus-oriented applications, such as for an Edge Card Connector or a ribbon cable interface. The SY10E122JC is also designed to be tolerant of power supply transients. This makes it suitable for applications with rapidly changing voltage levels, such as those found when the supply is being turned on or off. A logic zero, or logic one at the input will cause all four outputs to be enabled, providing an all-or-nothing, on/off type operation. The device is also designed with internal pull-up and pull-down resistors, which provide a stable bias even when the input voltage is absent.
The SY10E122JC also features an adjustable Schmitt trigger, allowing users to customize the input range of the device. This adjustment allows the device to be optimized for different applications, such as when the device is used to drive LED displays. The SY10E122JC also features a temperature range of -40°C to 85°C, making it suitable for use in a variety of environments. In addition, the device is available in a variety of packages, including PDIP, SOIC, and QFN, making it easy to integrate into most applications.
In summary, the SY10E122JC is a low-voltage CMOS quad bus-interface circuit containing four independent non-inverting buffers. The device is designed to provide a high-current, low-power drive capability from a 5-volt CMOS logic output, with adjustable Schmitt trigger. The SY10E122JC is tolerant of power supply transients, featuring internal pull-up and pull-down resistors, and a temperature range of -40°C to 85°C. This makes it ideal for applications with rapidly changing voltage levels, such as when the device is used to drive LED displays or for an Edge Card Connector or a ribbon cable interface.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
SY100EL1001ZC | Microchip Te... | 3.66 $ | 1000 | IC LASER DRIVER 1.25GBPS ... |
SY100EL1001ZC-TR | Microchip Te... | 2.67 $ | 1000 | IC LASER DRIVER 1.25GBPS ... |
SY100EL1001ZI | Microchip Te... | 3.66 $ | 1000 | IC LASER DRIVER 1.25GBPS ... |
SY100EL1001ZI-TR | Microchip Te... | 2.67 $ | 1000 | IC LASER DRIVER 1.25GBPS ... |
SY100EL1003ZC | Microchip Te... | 3.66 $ | 1000 | IC LASER DRIVER 1.25GBPS ... |
SY100EL1003ZC-TR | Microchip Te... | 2.67 $ | 1000 | IC LASER DRIVER 1.25GBPS ... |
SY100EL1003ZI | Microchip Te... | 3.66 $ | 1000 | IC LASER DRIVER 1.25GBPS ... |
SY100EL1003ZI-TR | Microchip Te... | 2.67 $ | 1000 | IC LASER DRIVER 1.25GBPS ... |
SY100EL1001ZG | Microchip Te... | 3.84 $ | 1000 | IC LASER DRIVER 1.25GBPS ... |
SY100EL1001ZG-TR | Microchip Te... | 2.53 $ | 1000 | IC LASER DRIVER 1.25GBPS ... |
SY100EL1003ZG | Microchip Te... | 0.0 $ | 1000 | IC LASER DRIVER 1.25GBPS ... |
SY100EL1003ZG-TR | Microchip Te... | 2.53 $ | 1000 | IC LASER DRIVER 1.25GBPS ... |
SY100EL34ZG | Microchip Te... | 2.37 $ | 34 | IC CLK GEN /2/4/8 3.3/5V ... |
SY100EP140LZG | Microchip Te... | 3.72 $ | 87 | IC FREQUENCY DETECTOR 3.3... |
SY100E222LTY-TR | Microchip Te... | 2.68 $ | 1000 | IC CLOCK GEN/BUFF LVPECL ... |
SY100E222LTY | Microchip Te... | -- | 1000 | IC CLOCK GEN/BUFF LVPECL ... |
SY100E222LTY-TX | Microchip Te... | 2.68 $ | 1000 | IC CLOCK GEN/BUFF LVPECL ... |
SY100EL34LZG-TR | Microchip Te... | -- | 1000 | IC CLK GEN /2/4/8 3.3/5V ... |
SY100E222LTI | Microchip Te... | 0.0 $ | 1000 | IC CLOCK GEN/BUFF LVPECL ... |
SY100E222LTG | Microchip Te... | 0.0 $ | 1000 | IC CLOCK GEN/BUFF LVPECL ... |
SY100E222LTI-TR | Microchip Te... | 0.0 $ | 1000 | IC CLOCK GEN/BUFF LVPECL ... |
SY100EL34LZC | Microchip Te... | 0.0 $ | 1000 | IC CLK GEN /2/4/6 5V/3.3V... |
SY100EL34LZC-TR | Microchip Te... | 0.0 $ | 1000 | IC CLK GEN /2/4/6 5V/3.3V... |
SY100EL34LZI | Microchip Te... | -- | 1000 | IC CLK GEN /2/4/6 5V/3.3V... |
SY100EL34LZI-TR | Microchip Te... | 0.0 $ | 1000 | IC CLK GEN /2/4/6 5V/3.3V... |
SY100EL34ZC | Microchip Te... | -- | 1000 | IC CLK GEN /2/4/6 5V/3.3V... |
SY100EL34ZC-TR | Microchip Te... | 0.0 $ | 1000 | IC CLK GEN /2/4/6 5V/3.3V... |
SY100EL34ZI | Microchip Te... | 0.0 $ | 1000 | IC CLK GEN /2/4/6 5V/3.3V... |
SY100EL34ZI-TR | Microchip Te... | 0.0 $ | 1000 | IC CLK GEN /2/4/6 5V/3.3V... |
SY100EL38LZC | Microchip Te... | 0.0 $ | 1000 | IC CLK GEN /2 /4/6 5/3.3V... |
SY100EL38LZC-TR | Microchip Te... | 0.0 $ | 1000 | IC CLK GEN /2 /4/6 5/3.3V... |
SY100EL38LZI | Microchip Te... | 0.0 $ | 1000 | IC CLK GEN /2 /4/6 5/3.3V... |
SY100EL38LZI-TR | Microchip Te... | 0.0 $ | 1000 | IC CLK GEN /2 /4/6 5/3.3V... |
SY100EL38ZC | Microchip Te... | 0.0 $ | 1000 | IC CLK GEN /2 /4/6 5/3.3V... |
SY100EL38ZC-TR | Microchip Te... | 0.0 $ | 1000 | IC CLK GEN /2 /4/6 5/3.3V... |
SY100EL38ZI | Microchip Te... | 0.0 $ | 1000 | IC CLK GEN /2 /4/6 5/3.3V... |
SY100EL38ZI-TR | Microchip Te... | 0.0 $ | 1000 | IC CLK GEN /2 /4/6 5/3.3V... |
SY100EP140LZC | Microchip Te... | 0.0 $ | 1000 | IC FREQUENCY DETECTOR 3.3... |
SY100EP140LZI | Microchip Te... | 0.0 $ | 1000 | IC FREQUENCY DETECTOR 3.3... |
SY100EP140LZI-TR | Microchip Te... | 0.0 $ | 1000 | IC FREQUENCY DETECTOR 3.3... |
IC TRANSCVR NON-INVERT 5.5V 24SOTranscei...
IC TXRX NON-INVERT 5.5V 20SSOPTransceive...
IC BUF NON-INVERT 3.6V 60HXQFNBuffer, No...
IC TXRX NON-INVERT 3.6V 48TSSOPTransceiv...
IC TXRX NON-INVERT 5.5V 56TSSOPTransceiv...
IC ADDRESS DRVR 3.6V 56TSSOPAddress Driv...