SY10EL31ZI-TR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SY10EL31ZI-TR is a logic flip flop circuit that is used to store information. It consists of three inputs, two outputs, and two logic states. The logic states are "set" and "reset," which are controlled by the inputs. The inputs to the flip flop circuit determine the state of the circuit. When one input is "high" and the other is "low", the circuit is in the "set" state; when both inputs are "high" or both are "low", the circuit is in the "reset" state.

Application Field

The SY10EL31ZI-TR is most commonly used as a building block for larger circuits and systems. It is used to store information, such as the state of a system, or a binary number. The logic flip flop is also used for sequential logic operations, such as in a microprocessor or a counter, where it is used to ensure that the information stored in the circuit is updated correctly in a timely manner. It is also used in digital signal processing, where it is used to store information such as a filter coefficient or a digital signal.

Working Principle

The SY10EL31ZI-TR uses two inputs and two outputs. One input is used to set the circuit, while the other is used to reset it. The two outputs are used to control the state of the circuit. The logic level at the output is determined by the logic level of the two inputs. When one input is "high" and the other is "low", the output is "high"; when both inputs are "low" or "high", the output is "low".

The SY10EL31ZI-TR is triggered on the rising edge of the input. When the input is low and then changes to high, the circuit is triggered and the output is determined by the logic level at the other input. If the other input is "high", the output is "high"; if the other input is "low", the output is "low". When both inputs are "high" or "low", the circuit is reset and the output goes to "low".

The SY10EL31ZI-TR is designed to hold its state until it is triggered again. This can be achieved by tying the reset input to the set input. The circuit will then stay in its current state and will only change when the set input changes from "low" to "high". This is known as synchronous operation of the circuit.

The SY10EL31ZI-TR is a very versatile logic flip flop and can be used in a wide range of applications. It is used in digital signal processing, microprocessors, counters, and other circuits to store information and control the flow of data. It can also be used in computer memory and in the design of memory circuits.

The specific data is subject to PDF, and the above content is for reference