SY898530UTZ

The SY898530UTZ is an output buffer device used in clock and timing circuits. Utilizing its high performance, small size and low power consumption, the SY898530UTZ is an ideal choice for many applications in flexible, low noise, voltage and current driven designs.

The SY898530UTZ is designed to be used as a clock buffer and driver. An output can be provided with a suitable pull-up, pull-down and shield circuits or by using a special pin for input or output.

In terms of its power consumption, the SY898530UTZ is one of the lowest-power clock and timing chips on the market. The device can operate at lower than 0.1mA in typical applications, and at just 0.005mA under low-voltage operation.

The SY898530UTZ\'s output driver is able to transmit signals with frequencies ranging from 20MHz to 250MHz. It can accept input signal frequencies of 30MHz or lower. It is also able to provide up to five separate outputs with a minimum pulse width of 4ns. Each output can be set as a single-ended or differential type.

The SY898530UTZ employs 8-bit tuning architecture, meaning it is able to accept 8-bit input words and to drive up to 8-bit data. The device can be used to drive duty cycles of 50% to 100%, with tolerance up to 15% over a wide range of input frequencies.

The device also operates in a wide voltage range of 1.8V to 4.5V and is available in two versions of package, TSSOP and QFN.

Due to its capabilities, the SY898530UTZ is applicable in a large number of applications including mobile phones, PDAs and other portable devices. It is also suitable for real-time data communication systems, such as 10G Ethernet, EDGE and CDMA.

The SY898530UTZ is a versatile clock buffer and driver which meets the requirements of several markets. Its low power consumption and compatibility with a wide range of input frequencies make it an attractive option for many designs.