T101-5C2-071-M1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Encoders

An encoder is a type of electrical device that turns motion into an electrical signal using a capactiative or inductive transducer to sense the motion. The output of the transducer is an analog signal that is then converted into a digital signal. The digital signal is used by the encoder to output a constant voltage indicating the direction and/or speed of the motion.

T101-5C2-071-M1 is one of these encoders. It is a type of incremental encoder from the brand “6”. This type of encoders are used in industrial applications where reliable and accurate motion control is required. It’s an incremental encoder where a rotary motion causes a change in the output pulses.

This encoder is made up of a rotary shaft, connected to a disc with a series of segments of small scratches. These scratches act as transistors and the shaft has to rotate in order for them to open and close. As the shaft rotates, each of the segments produces two digital pulses, known as A and B pulses. When the shaft is turned in one direction, the A and B pulses will change in a certain pattern. This pattern is known as quadrature and is a measure of the direction and speed of the motion.

The signals that are produced from the encoder are then sent to a control system, such as a motor controller, where they are interpreted and used to control the motion of a motor, or other device. The signals can also be read by a computer using special encoder logic to control the motion of a pendulum, or to track the motion of an object.

The T101-5C2-071-M1 encoder is an industrial-grade device that is capable of operating in extreme temperature and vibration conditions. It is often used in military applications and is heavily sealed against dust or moisture. It is also designed to be used in high-load applications, as it has a rated speed of up to 4Khz with a five-bit resolution.

In summary, the T101-5C2-071-M1 is an incremental encoder used in industrial applications. It generates two digital pulses at the same time when its shaft is turned in one direction. These pulses generate a pattern of a quadrature, which is used to represent the direction and speed of the rotary motion. The encoder has a rated speed of up to 4Khz with a five-bit resolution, making it ideal for applications that require accurate and reliable motion control.

The specific data is subject to PDF, and the above content is for reference