T110D107K020AS

Series:	T110
Packaging:	Bulk
Lead Free Status / RoHS Status:	--
Part Status:	Active
Moisture Sensitivity Level (MSL):	--
Capacitance:	100µF
Tolerance:	±10%
Voltage - Rated:	20V
Type:	Hermetically Sealed
ESR (Equivalent Series Resistance):	600 mOhm
Operating Temperature:	-55°C ~ 125°C
Lifetime @ Temp.:	--
Mounting Type:	Through Hole
Package / Case:	Axial
Size / Dimension:	0.351" Dia x 0.786" L (8.92mm x 19.96mm)
Height - Seated (Max):	--
Lead Spacing:	--
Manufacturer Size Code:	D
Features:	General Purpose
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Tantalum Capacitors

Tantalum capacitors are designed to store and release electrical energy, and are found in a wide variety of applications, from power supplies to cell phone electronics. The most common type of tantalum capacitor is the T110D107K020AS. This device is a surface mount capacitor with a 0.7 Ar chemistry, and a capacitance of 10μF. It can operate from −55 to +125°C, and has a 3-pin configuration.

Application Field

Tantalum capacitors are commonly used in applications that require high-reliability and/or high-temperature operation, such as motor control circuits, power supplies, communications systems and military systems. The T110D107K020AS is often found in wireless communications systems, automotive electronic modules, and portable electronic systems. Its high-temperature range and small size make it particularly suited for these applications.

Working Principle

A tantalum capacitor works by storing energy in an electrochemical double layer at the interface between the tantalum oxide layer and the electrolyte. When an applied voltage is applied to the capacitor, the electrolyte ions move towards the tantalum oxide layer, which creates an electric field. This electric field then causes electrons to flow in the opposite direction, resulting in a charge being stored on the capacitor. The capacitance of the T110D107K020AS is 10μF, which indicates that it is able to store a charge of 10 Coulombs when a 1 Volt potential difference is applied. This storage capacity makes it suitable for many applications. The T110D107K020AS is a surface mount tantalum capacitor, which means that it can be soldered directly onto a circuit board. This makes it easier to assemble and reduces the risk of short circuits or other errors. The device is rated for an operating temperature of −55 to +125°C, which makes it suitable for extremely hot or cold conditions.

Conclusion

The T110D107K020AS is a surface mount tantalum capacitor with a capacitance of 10μF, a 0.7 Ar chemistry, and a temperature range of −55 to +125°C. It is commonly used in high-reliability and/or high-temperature applications such as motor control circuits, power supplies, communications systems and military systems. The device works by storing energy in an electrochemical double layer, and has a range of advantages, such as its small size, low cost, and simplicity of use.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description