T110D566J020AS

Operating Temperature:	-55°C ~ 125°C
Failure Rate:	--
Features:	General Purpose
Manufacturer Size Code:	D
Lead Spacing:	--
Height - Seated (Max):	--
Size / Dimension:	0.351" Dia x 0.786" L (8.92mm x 19.96mm)
Package / Case:	Axial
Mounting Type:	Through Hole
Lifetime @ Temp.:	--
Series:	T110
ESR (Equivalent Series Resistance):	1.2 Ohm @ 100kHz
Type:	Hermetically Sealed
Voltage - Rated:	20V
Tolerance:	±5%
Capacitance:	56µF
Moisture Sensitivity Level (MSL):	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Tantalum capacitors, also known as tantalum electrolytic capacitors, are electrolytic capacitors that use a tantalum rod as its anode in combination with an electrolyte solution as its dielectric, used in electronics and other electrical applications. Unlike other types of electrolytic capacitors, they can be used as high-temperature capacitors due to their construction, with a wide range of ratings, making them very useful in both commercial and industrial applications. The T110D566J020AS is a type of tantalum capacitor that is specifically designed for use in dense high-density power supplies, power electronics, and high-performance supercomputing applications.

Design

The T110D566J020AS is a high-density, polarized tantalum capacitor with a high capacitance-to-volume ratio. It is a surface-mount component, meaning it requires minimal space when it is soldered onto the printed circuit board (PCB). The T110D566J020AS consists of a tantalum metal enclosure with an electrolytic solution inside, which serves as the electronic dielectric material. This material is surrounded by a metallic electrode layer that serves as the equivalent of a storage reservoir for stored charge. This allows for a greater amount of capacitance than traditional electrolytic capacitors. The T110D566J020AS also includes a built-in surge protection circuit, which allows it to withstand high peak current surges.

Uses

The T110D566J020AS tantalum capacitor is most commonly used in applications that require a high level of reliability, such as circuitry in portable electronics, industrial and medical products, and advanced power supplies and power management systems. In these applications, temperature-sensitive components require a stable source of voltage that can maintain its integrity when faced with high temperature and fluctuations in the electrical input. The T110D566J020AS has an impressive operating temperature range of -55°C to +125°C, meaning it can function reliably in temperatures as low as -55°C and as high as +125°C.The T110D566J020AS is also commonly used in telecommunications and networking equipment, as well as automotive and military applications. It is particularly useful in applications where high power, reliability, and very low ESR values are essential, as it has a good power rating (660mW) and an ESR value of 0.1 ohms.

Working Principle

The working principle of the T110D566J020AS is relatively simple. When electricity is applied to the capacitor, the anode is polarised by the electric current, and a chemical reaction occurs within the electrolyte solution that causes charge to build up on the anode. This charge can then remain in the capacitor even after the electricity is removed, effectively storing electricity within the capacitor itself. When electricity is applied to the capacitor again, the stored charge is released, allowing for a continuous supply of electrical energy to the connected circuit.

Conclusion

The T110D566J020AS is an excellent example of a high-density, polarized tantalum capacitor, capable of providing reliable power in a variety of applications. With a temperature range of -55°C to +125°C, it is suitable for use in a wide range of environments, from portable electronics to heavy industrial and military applications. Its high capacitance-to-volume ratio and low ESR value make it especially useful for dense high-density power supplies, power electronics, and high-performance supercomputing applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description