T1210-800G-TR Discrete Semiconductor Products

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors - TRIACs are semiconductor devices that are used as a type of switch for alternating current (AC). The T1210-800G-TR is a TRIAC specifically designed for light-load switching. It has a high withstand current of 800A, a low conduction loss, and is capable of operation at 125V with a blocking voltage of 600V. It is mainly used in applications such as motor control, lighting ac power control, light load switching, and power supply control.

The main working principle of a TRIAC is that it is able to regulate the power applied to a load. It does this by conducting current through one direction and then blocking it from flowing in the opposite direction after a certain point. This is referred to as the holding current and determines the amount of power that is delivered to the load.

The T1210-800G-TR operates by using a negative gate signal to switch the TRIAC on, which allows current to flow through one direction. When the gate signal is removed, the TRIAC switches off, preventing current from flowing in the opposite direction. This allows the TRIAC to be used to regulate the power delivered to the load and prevent current overloads.

The T1210-800G-TR is used in a wide range of applications. For example, it can be used in motor control applications such as ceiling fan control and ventilation systems. It can also be used in lighting ac power control applications such as dimmers, motion sensors and emergency lighting. In addition, it can be used for light load switching such as for incandescent, halogen and LED bulbs. Finally, it can be used in power supply control such as for voltage regulators and AC adapters.

In conclusion, the T1210-800G-TR is a TRIAC specifically designed for light- load switching applications. It features a high withstand current of 800A, a low conduction loss, and is capable of operation at 125V with a blocking voltage of 600V. It is used in a wide range of applications such as motor control, lighting ac power control, light load switching, and power supply control. The working principle of a TRIAC is to regulate the power applied to a load by using a negative gate signal to switch the TRIAC on, allowing current to flow one direction, and then switching it off when the gate signal is removed, preventing current from flowing in the opposite direction.

The specific data is subject to PDF, and the above content is for reference