Allicdata Part #: | CC1943-ND |
Manufacturer Part#: |
T483A |
Price: | $ 24.90 |
Product Category: | Discrete Semiconductor Products |
Manufacturer: | Sensata-Crydom |
Short Description: | MODULE POWER |
More Detail: | Bridge Rectifier Single Phase Standard 200V Surfac... |
DataSheet: | T483A Datasheet/PDF |
Quantity: | 7 |
1 +: | $ 22.40910 |
Series: | -- |
Packaging: | Bulk |
Part Status: | Not For New Designs |
Diode Type: | Single Phase |
Technology: | Standard |
Voltage - Peak Reverse (Max): | 200V |
Current - Average Rectified (Io): | 10A |
Current - Reverse Leakage @ Vr: | 25µA @ 100V |
Operating Temperature: | -- |
Mounting Type: | Surface Mount |
Package / Case: | Module |
Supplier Device Package: | Module |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Diodes are a form of electronic component which are used for a variety of applications. One of the most common kinds of diode is the bridge rectifier, so-called because it consists of four standard diodes arranged in a bridge configuration. The bridge rectifier is an extremely useful component and has many different applications, one of which is the T483A bridge rectifier.
The T483A Bridge Rectifier is a high efficiency, low power device that can be used in a variety of situations. It offers a nominal voltage drop of 1.2V and a peak current blocking capacity of up to 4 Amps. This device is capable of operating over a temperature range of -40°C to +125°C, making it suitable for a variety of environmental applications. Its low on-state voltage drop ensures high efficiency for applications where power conservation is vital.
The T483A can be used in a variety of ways, including air-handling, telecommunications, aerospace and industrial control systems. The device is primarily used for rectification and data conversion applications, where a small or medium current level is required. It is also suitable for powering LEDs, dimming lighting and controlling variable frequency drives.
The working principle of the T483A is based on the familiar diode bridge rectifier configuration. A diode bridge rectifier contains four diodes, each of which is wired in series and in opposite directions, forming a bridge circuit. The four terminals of the bridge rectifier are connected to the supply voltage, with either the anode (positive) or cathode (negative) of each diode being connected to the supply.
When the bridge rectifier is connected to the voltage source, current begins to flow within it, which causes the diode\'s voltage drop to occur. This voltage drop will ensure that the supply voltage is stepped down to the required dc voltage. The current then continues to flow in its intended direction, allowing the device to function as a rectifier.
The T483A offers an efficient, low-maintenance solution for a variety of applications. Its high efficiency and its ability to operate over a wide range of temperatures make it an ideal choice for a variety of tasks, from powering LEDs to controlling variable frequency drives.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
T4832200 | Red Lion Con... | 224.5 $ | 4 | CONTROL TEMP SS/VOLT OUT ... |
T4832210 | Red Lion Con... | 0.0 $ | 1000 | PID CONTROLLER DCTemperat... |
T483A | Sensata-Cryd... | 24.9 $ | 7 | MODULE POWERBridge Rectif... |
T483C | Sensata-Cryd... | 27.87 $ | 10 | MODULE POWERBridge Rectif... |
T483F | Sensata-Cryd... | 37.4 $ | 2 | MODULE POWERBridge Rectif... |
T483B | Sensata-Cryd... | 0.0 $ | 1000 | MODULE POWERBridge Rectif... |
BRIDGE RECT 1PHASE 1KV 2A KBPMBridge Rec...
IC BRIDGE RECT 1.5A 100V WOMBridge Recti...
IC BRIDGE RECT 1.5A 50V WOMBridge Rectif...
RECT BRIDGE 1200V 90A MTKBridge Rectifie...
RECT BRIDGE 1A 240VBridge Rectifier Sing...
BRIDGE RECT 3 PHASE 800V 58ABridge Recti...