T491A105M020AS Capacitors

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Tantalum Capacitors are perhaps the most common type of electrolytic capacitor found in electronic circuits. The T491A105M020AS is a special type of tantalum capacitor. It is an axial-leaded capacitor with an anode made of sintered tantalum powder. Its anode and cathode are connected to the leads by aluminum and tantalum capacitors. The T491A105M020AS has a maximum working voltage of 20V and a capacitance of 10 μF.

The capacitor consists of two electrodes, an anode and a cathode, separated by a dielectric layer. This dielectric layer is made of tantalum pentoxide which acts as an insulator and gates the electric charge to the capacitor’s dielectric layer. The capacitor’s dielectric layer also acts as an impedance that controls the rate at which electricity is stored and released.

One of the primary advantages of the T491A105M020AS is its ability to function in a wide variety of applications. Its versatility makes it suitable for a variety of duties such as power supply bypassing, smoothing, coupling, decoupling, and RFI suppression. It can also be safely used in high-power pulsed and pulsed-current circuits to provide energy storage capabilities.

The T491A105M020AS has an operating temperature range from -55°C to +125°C (-67°F to +257°F). This wide temperature range makes it suitable for use in even the most extreme environmental conditions. The low-ESR characteristic of the T491A105M020AS enables it to work reliably over a wide temperature range.

The working principle of the T491A105M020AS is based on Faraday\'s Law. According to the law, when a voltage is applied to the capacitor’s anode and cathode terminals, a current flows through the capacitor. This current causes a charge to build up on the capacitor’s dielectric layer. Once the capacitor reaches its maximum charge, the current stops flowing.

The T491A105M020AS can also be used in a variety of situations to reduce noise and improve signal clarity. The low ESR characteristic of the capacitor allows it to filter out short high frequency noise without significantly affecting the desired signal. This filtering capability enables the capacitor to provide noise suppression in RF applications.

The T491A105M020AS is widely used in a variety of circuits and applications due to its versatility, low ESR, and wide temperature range. It can be used to provide energy storage, reduce noise, and improve signal clarity. It is also suitable for use in a variety of extreme environmental conditions.

The specific data is subject to PDF, and the above content is for reference