T491B336M020AT Capacitors

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Tantalum capacitors are a type of capacitor that have a high capacitance-to-volume ratio, making them ideal for applications such as power management and signal conditioning. They are also known as tantalum electrolytic capacitors, as they are produced electrolytically.

The T491B336M020AT is a leaded radial-leaded tantalum capacitor with a total capacitance of 2.2μF and a rated voltage of 25V. It is an electrolytic capacitor with an anode and a cathode, with a tantalum anode material, and with an MnO2 cathode. Its lead-free construction makes it RoHS (restriction of hazardous substances) compliant.

The application field of the T491B336M020AT capacitor is mainly in power and signal conditioning, as it has a high capacitance-to-volume ratio, meaning it is able to hold more charge in a given volume. This is especially beneficial in applications such as power management, where high efficiency and low disruption are required. Additionally, the T491B336M020AT has a low ESR, meaning that when power is being switched, there is only a minimal amount of disruption. This is beneficial in both power and signal conditioning applications.

The working principle of a tantalum capacitor is essentially the same as any other capacitor. When a potential difference is applied across its terminals, charge begins to accumulate on its plates. This accumulated charge produces a voltage, which builds up until the potential difference between the capacitor’s plates is equal to the applied potential difference. This is what is known as the capacitor’s steady-state voltage.

The charge stored on the capacitor’s plates will then begin to flow, depending on the applied potential difference: flowing from the higher potential to the lower. The charge stored on the capacitor’s plates will continue to flow until the capacitor is fully charged, or until the applied potential difference between its plates is removed. This charge and discharge cycle is the basis of the operation of all capacitors.

Tantalum capacitors, such as the T491B336M020AT, are widely used in power and signal conditioning due to their high capacitance-to-volume ratio and their low ESR. Their ability to store and transfer a large amount of charge in a small area makes them ideal for applications where efficiency and minimal disruption are required. The working principle of tantalum capacitors is the same as all other capacitors, with a charge-discharge cycle that allows them to store and release electrical energy.

The specific data is subject to PDF, and the above content is for reference