T491X227M016AT

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to Tantalum Capacitors

The two major electronic components that use tantalum are the tantalum capacitor and the tantalum wire. The purpose of each device is quite different although there are similarities. The unique properties of tantalum make it well suited to both tasks. This article will focus on the uses of tantalum capacitors.

Construction

Tantalum capacitors use tantalum powder layered between two electrodes. The tantalum powder is often mixed with glass, rubber, or plastic to form a ‘dielectric’ layer that stores the electrical charge. The layer of tantalum powder between the two electrodes is referred to as the ‘plate’. The two electrodes are usually made of metal and can be formed into various shapes.

Applications

Tantalum capacitors have many varied applications, they are often used as filter capacitors in power supplies as they have a high capacitance-to-volume ratio. They are used in military and aerospace equipment as well as for switching regulators, for example in LCD colour displays. Because of its low leakage current and low temperature sensitivity, tantalum capacitors are also used for high frequency applications. Tantalum capacitors are also used in computer motherboards and in microprocessors.

T491X227M016AT

The T491X227M016AT is an example of a Tantalum capacitor and its application field is that of high frequency and temperature sensitive applications. Its working principles is that of traditional capacitors, as current is applied, an electrical charge builds up between two metal electrodes separated by a thin film of tantalum powder. This charge is then stored when the current is relieved.

Benefits

Tantalum capacitors have a number of unique benefits that make them ideal for a wide range of applications. They have a high capacitance per unit volume which enables them to be used where large capacitors are required in a limited space. They are also highly stable with regards to changes in temperature and time, resulting in a stable output. Their leakage current is a few orders of magnitude lower than that of other capacitors also making them very stable.

Limitations

One of the main limitations of Tantalum capacitors is that they are relatively expensive due to the rarity of their material. This can limit their applications in cost sensitive sectors such as consumer electronics. Their dielectric breakdown voltage is also fairly low meaning that if it is exceeded the capacitor may fail. This must be taken into consideration when designing circuitry.

Conclusion

Tantalum capacitors such as the T491X227M016AT are capable of performing in a wide range of applications due to their unique properties and benefits. They also have some limitations in relation to their cost and breakdown voltage. It is important to consider these when deciding which capacitor to use for a circuit.

The specific data is subject to PDF, and the above content is for reference