T495A685K010ATE1K8

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Tantalum capacitors are solid electrolytic capacitors made of tantalum metal by an anodization process – typically coated with a layer of manganese dioxide or other chemical. These capacitors find use in providing high capacitance in electronic circuits. Used in both commercialand military electronic products, they are known for their long shelf life, low cost and higher efficiency.

T495A685K010ATE1K8 is a type of tantalum capacitor. There are two types of tantalum capacitors, axial and surface mount, based on their physical construction. This type of capacitor is surface mount, meaning it is made of a rectangular-shaped chip of tantalum and a solderable terminal. This type of surface mount is also known as a miniature surface mount (MSM) capacitor. Due to the small size of the device and its highly reliable performance, it is ideal for embedded applications, such as cellular phones, digital cameras, and other GPS-drivendevices.

The capacitance of the T495A685K010ATE1K8 capacitor is 10 µF (micro Farad). Its dielectric is Solid Tantalum Anode. It has a tolerance of ± 10 %, meaning it can deviate from its stated capacitance by up to 10 % on either side. Its operating temperature range is -55 to +125 oC and its low ESR (equivalent 2 series resistance) is 0.27 Ohms. Moreover, it has a maximum working voltage of 6.3 volts.

The working principle is the same as any other type of capacitor. It stores energy through electric fields, storing an electrical charge between two conductive “plates”. The key difference lies in the materials used: tantalum capacitors use a tantalum anode and a manganese dioxide electrolyte. This construction helps to prevent leakage over time, making it exceptionally reliable. When current enters the anode, it is deposited on its surface in the form of an oxide film. This oxide film acts as an electrical insulation layer, thus enabling the capacitor to not discharge.

The applications for a T495A685K010ATE1K8 capacitor are the same as any other type of tantalum capacitor. It can be used in applications where a high capacitance is necessary, such as in power supplies or where a wide temperature range is required. They are also used in mobile phone boards and audio-video equipments, and can also be used in automotive circuitry, as they are known for their robustness.

In conclusion, the T495A685K010ATE1K8 is a tantalum capacitor with a capacitance of 10 µF and very low ESR, making it ideal for use in embedded applications. Its dielectric is Solid Tantalum Anode and it has an operating temperature range of -55 to +125 oC with a maximum working voltage of 6.3 volts. Its capabilities also make it suitable for use in power supplies, audio-video equipment, and automotive circuitry.

The specific data is subject to PDF, and the above content is for reference