T495D157M016ATE130

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Tantalum capacitors have become the go-to choice for a wide range of industrial, commercial, and consumer applications. They are an excellent choice for use in high frequency, high current, and high voltage applications due to their high capacitance and low equivalent series resistance (ESR). The T495D157M016ATE130 is a type of tantalum capacitor that is often found in many of these applications.

A tantalum capacitor is an electrolytic capacitor that utilizes tantalum as one of its electrodes. These capacitors are constructed with a thin, porous, tantalum-oxide layer as the dielectric material between the two electrodes. The other electrode is usually made of aluminum, and is immersed in a solution of electrolyte. Electrolytecapacitors are not only highly efficient and reliable, but also able to store a tremendous amount of charge with a relatively small size.

The T495D157M016ATE130 is typically used in high voltage applications. It has a maximum operating voltage of 16 volts, and a capacitance of 130 microfarads. It also has an equivalent series resistance (ESR) of 40 mohms. This makes it particularly well-suited for use in switched mode power supplies, motor drive circuits, and other high current applications.

The working principle of the T495D157M016ATE130 is fairly straightforward. When a voltage is applied across its terminals, a current will flow through the capacitor. This current is used to charge the capacitor, and will continue to flow until the capacitor is fully charged. At this point, the capacitor will be able to hold the charge it has been given. This stored charge can then be used later to power an electrical circuit.

The T495D157M016ATE130 is a versatile and reliable component, and can be used in a wide variety of applications. It is particularly well-suited for use in high voltage applications where a smaller size capacitor is required. It also has a relatively low ESR, making it an ideal choice for switched mode power supplies and motor control circuits.

The specific data is subject to PDF, and the above content is for reference