T541X686M030BH8620

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Tantalum - Polymer Capacitors are a type of layered capacitor consisting of two or three thin layers of metallic dielectric material on an insulating substrate. The structure of Tantalum - Polymer capacitors is similar to that of a very thin film capacitor, whereby the bottom layer of metal is separated by an insulating layer, allowing the top layer of metal to act as an electrode when it is polarized with an electric field. The two terminals are connected to a conductive material such as a conducting wire, or an integrated circuit or a ceramic capacitor.

The T541X686M030BH8620 is a capacitance-stabilized surface mount Tantalum-Polymer capacitor designed for use in consumer electronics applications. The T541X686M030BH8620 has a wide range of applications including automotive systems, RFID readers, GPS modules, modem, radio transmitters and receivers, digital signal processing systems, televisions and home automation, telecom equipment, and power supplies.

The T541X686M030BH8620 is designed for a wide capacitance range of 0.3 µF to 387 µF and is available in sizes ranging from 0201 to 7343. The manufacturer has specified a capacitance tolerance of ±20 percent, which is suitable for most consumer electronic applications. The rated voltage of the capacitor is 6.3 V, while the dissipation factor of the capacitor is at least 2 percent.

The working principle of the T541X686M030BH8620 is that it consists of two thin layers of metal and an insulating layer. On the insulating layer, another thin layer of metal is placed and the two terminales are connected to the metal layers. The capacitor works by the polarization of the two terminals in the presence of an electric field. As a result, a charge builds up and is stored in the capacitor, providing the required capacitance.

The stored charge is called capacitance, and it is measured in µF (microfarads). The capacitance is determined by the ratio between the surface area and the thickness of the two metal layers. The thicker the metallic layers and the larger the surface area, the higher the capacitance stored. The capacitance of each device can be changed by altering the thickness and surface area of the metal layers.

The T541X686M030BH8620 is an ideal choice for applications requiring a stable, reliable and low-profile surface mount capacitor. It has a wide range of applications and is designed for a wide range of capacitance values, making it suitable for low voltage and high frequency applications. The ratio of the capacitance to voltage is also designed to ensure that the capacitance remains reasonably constant over time and temperature, making it ideal for applications such as automotive, telecommunications and GPS systems.

The specific data is subject to PDF, and the above content is for reference