T860N32TOFVTXPSA1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The T860N32TOFVTXPSA1 is a thyristor module manufactured by STMicroelectronics. It is a three-phase, low budget, 1-A, 800-V unidirectional Thyristor module, manufactured in a surface mounted plastic package. This device is designed for use in a wide range of applications, including DC-AC inverter control, power factor correction, motor control, light dimming, and AC-DC converters.

The T860N32TOFVTXPSA1 module consists of three N-type controlled rectifier (SCR) thyristors in a single package. Each SCR is rated for a one-amp current rating and a voltage rating of up to 800 volts. The thyristors are arranged in an anti-parallel configuration, meaning that when one SCR is “on,” the other two thyristors are “off.” This enables the module to easily modulate the current and voltage levels with simple pulse width modulation.

The module has an on-state current of 1A and a peak repetitive reverse voltage of 800V. It also has a forward voltage drop of 0.45 V at 1A and a surge overload rating of 350A at 8.3ms. The module can handle up to 100A for 2ms for applications such as inductive loads.

The T860N32TOFVTXPSA1 module has a wide range of applications, from motion control and AC-DC conversion to soft starters, rectifiers, and choppers. In motion control applications, the module can be used for speed and/or position control of three phase AC induction motors. It also works well for applications such as AC-DC converters for controlling rectification or controlled phase angle firing of SCRs or TRIACs.

This module also works well for soft start applications, such as power factor correction, capacitor discharge, and induction motor start-stop control. In rectification applications, the module can be used for speed and/or voltage control of single phase AC motors. In chopper applications, the module can control the output DC level and waveform. The T860N32TOFVTXPSA1 offers superior performance to standard modules, because it features higher voltage, higher current, and surge overload capacity.

The T860N32TOFVTXPSA1 is also well suited for lightning protection applications. Its current rating is high enough to resist lightning transients, and its surge overload rating is high enough to support the necessary power levels.

This device offers full wave, phase control SCR triggering and can be used for control of an electrical load in a proportional manner. The on-state voltage and current of the module can be varied for different applications, such as light dimming or motor speed control.

The T860N32TOFVTXPSA1 module is also suitable for power factor correction applications. In this application, its high maximum current and large surge overload rating enable the user to correct for power quality issues, helping to reduce energy costs. The module can also be used for reversing single-phase AC motor control.

In summary, the T860N32TOFVTXPSA1 is a low-cost, 1-amp, 800-volt unidirectional thyristor module that can be used in a wide range of applications. Its robust design and excellent surge overload rating make it an ideal choice for motor control, AC-DC conversion, soft starter, rectifier, chopper, and power factor correction applications.

The specific data is subject to PDF, and the above content is for reference