T86E226M035EBAS

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Tantalum capacitors, sometimes referred to as tantalum electrolytic capacitors, are polarized, ultra-low profile, high-capacitance capacitors which offer higher capacitance than ceramic capacitors while being much smaller in size. T86E226M035EBAS is a type of tantalum capacitor which is made up of a tantalum anode and a solid ion-conducting electrolyte, with solid electrodes that provide very low-loss characteristics, superior temperature characteristics, and low ESR relative to other capacitor technologies.

The T86E226M035EBAS capacitor has a nominal capacitance of 22uF at 10V and a rated voltage of 16V. It has a capacitor diameter of 8mm, a maximum height of 6.3mm and a 10% maximum ESR of 25mΩ. The lower ESR of T86E226M035EBAS capacitors is due to the fact that they are constructed using a solid polymer electrolyte. This low ESR also makes these capacitors ideal for use in high-frequency applications, as this means that they have a low impedance to signals at high frequencies, limiting the amount of signal attenuation. The low impedance also helps reduce heat generation and increase power and signal integrity.

Applications for T86E226M035EBAS capacitors vary depending on the characteristics of the specific capacitor, but include high-frequency switching power supplies, voltage regulator modules, electric vehicles and other automotive applications, and telecommunications and industrial equipment. They are also ideal for use in medical devices, portable devices, and consumer electronics.

The working principle of the T86E226M035EBAS capacitor is relatively simple. When a voltage is applied to the capacitor, it stores energy by charging up until the voltage is equal to the capacitor\'s rated voltage. This creates a voltage difference between the two sides of the capacitor, and the electric field created by this difference stores energy in the form of an electric charge. The higher the voltage applied to the capacitor, the more electric charge it can store, and the higher the capacitance.

When the electric current is removed, the stored electric charge keeps the capacitor charged. When the electric current is reapplied, the capacitor discharges the stored charge and returns to its original state. This basic design means that the capacitor can be used to store and release energy as needed for a variety of applications.

In summary, the T86E226M035EBAS capacitor has a wide range of applications and can offer high capacitance in a small form factor. Its low ESR also makes it ideal for use in high-frequency applications, while its solid polymer electrolyte construction helps to keep heat generation and signal attenuation to a minimum. The capacitors are simple to use, and their ability to store and release energy as needed make them suitable for a wide range of applications.

The specific data is subject to PDF, and the above content is for reference