T95D107M016LSSL

Operating Temperature:	-55°C ~ 125°C
Failure Rate:	--
Features:	High Reliability
Ratings:	COTS
Manufacturer Size Code:	D
Lead Spacing:	--
Height - Seated (Max):	0.122" (3.10mm)
Size / Dimension:	0.293" L x 0.170" W (7.44mm x 4.32mm)
Package / Case:	2917 (7343 Metric)
Mounting Type:	Surface Mount
Lifetime @ Temp.:	--
Series:	TANTAMOUNT®, T95
ESR (Equivalent Series Resistance):	80 mOhm
Type:	Conformal Coated
Voltage - Rated:	16V
Tolerance:	±20%
Capacitance:	100µF
Moisture Sensitivity Level (MSL):	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Tantalum Capacitors Tantalum capacitors are available in two primary types: solid and wet. T95D107M016LSSL is a type of wet tantalum capacitors that is used in various applications. It is a molded chip type capacitor which contains the dielectric material tantalum pentoxide (Ta2O5) in an electrolytic solution of organic acids, such as benzyl trimethyl ammonium chloride.The main advantages of wet tantalum capacitors are their high electrical stability and their temperature-independent temperature characteristics. They are also very robust against mechanical and environmental stresses such as high acceleration or pressure. Wet tantalum capacitors are commonly used in military, aerospace, and medical applications where reliable power and ruggedness are required.In terms of application field, T95D107M016LSSL are commonly used in motor control, power supplies, voltage-regulator circuits, and other applications that require capacitors with higher capacitance values and greater voltage ratings. More specifically, these capacitors are used to store energy in applications where a higher voltage rating is required than the rated voltage of other wet tantalum capacitors.The working principle of T95D107M016LSSL is based on the structure of their electrodes and the construction of the dielectric material between them. A layer of wet tantalum pentoxide (Ta2O5) acts as the dielectric material, while two conductive plates, typically made of tantalum, are used as the electrodes. The capacitor’s electrical field is created by an electrical potential applied at the two plates which causes the Ta2O5 film to polarize and attract and hold electrical charges.Once the electrical polarizing forces are established, current flows between the electrodes based on the amount of charge stored in the capacitor’s dielectric. The capacitor’s capacitance determines the amount of charge which can be stored in its dielectric, and therefore the amount of current that can flow through its electrodes when the electrical potential is applied.T95D107M016LSSL capacitors are, in general, more reliable than other wet tantalum capacitors due to their greater voltage rating and higher capacitance values. This makes them ideal for use in high voltage and high power applications where higher failure rates due to component aging are not acceptable.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description