TA305PA7K50JE

Series:	Power Chip® TA
Packaging:	Bulk
Part Status:	Active
Resistance:	7.5 kOhms
Tolerance:	±5%
Power (Watts):	5W
Composition:	Thick Film
Features:	--
Temperature Coefficient:	±50ppm/°C
Operating Temperature:	-55°C ~ 180°C
Package / Case:	Radial
Supplier Device Package:	Powerchip®
Size / Dimension:	0.500" L x 0.100" W (12.70mm x 2.54mm)
Height - Seated (Max):	1.020" (25.91mm)
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors – TA305PA7K50JE

Through hole resistors are an important component in many electronic systems. TA305PA7K50JE is an example of such a resistor. It is preferred due to its small and compact size. This resistor is widely used due to its high reliability and performance.

Application Field

The TA305PA7K50JE resistor is mainly used in resistive networks, providing power control, load balancing, or current limiting. Its design facilitates predictable and consistent performance in both linear and non-linear loads. Other applications include feedback networks, providing electrical isolation and reducing noise and interference. Furthermore, the resistor can also be used as a protection circuit, for example, for over current protection and overload protection.

Working Principle

The TA305PA7K50JE resistor works based on Ohm\'s law, i.e. the current (I) through a conductor between two points is directly proportional to the voltage (V) applied across the conductor. The property of resistance (R) is dependent on the material involved, while the current (I) is usually constant, so the resistance of an element is defined as the ratio of voltages applied across its two points and the current that passes through it. The TA305PA7K50JE resistor is a precision thick film resistor, which is placed directly on the Printed Circuit Board (PCB) using the through-hole technique. The resistor is composed of a resistor element, a substrate and a termination resistor for durability and reliable operational performance. The nickel-tin (Ni/Sn) termination is used to facilitate soldering. The chip resistor relies on a fired-on base that is made from green chip material. In its operation, the resistor dissipates power due to energy losses incurred in its resistance element. Heat is then dissipated via the resistor\'s housing and external components. A wide range of resistors is available in the market and TA305PA7K50JE is among them. It is a reliable and efficient choice due to its design features and consistent performance.

Conclusion

The TA305PA7K50JE resistor is an essential component in many electronic systems and its working principle is based on Ohm’s law. This resistor offers a reliable and efficient performance and is widely used in resistive networks, feedback networks, and protection circuits. The resistor has a compact size and is mounted on a PCB using the through-hole technique. Its high performance and durability make it an ideal choice for a variety of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description