TANGO20/0.3M/SMAM/S/S/26

VSWR:	1.5
Applications:	GPS
Height (Max):	0.571" (14.50mm)
Mounting Type:	Panel Mount
Ingress Protection:	IP67
Termination:	Connector, SMA Male
Features:	--
Gain:	28dB
Return Loss:	--
Series:	TANGO 20
Number of Bands:	1
Antenna Type:	Puck
Frequency Range:	--
Frequency (Center/Band):	1.575GHz
Frequency Group:	UHF (1 GHz ~ 2 GHz)
Part Status:	Obsolete
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction of TANGO20/0.3M/SMAM/S/S/26 RF Antennas

RF antennas are an important component of any wireless network. The TANGO20/0.3M/SMAM/S/S/26 is a special type of RF antenna that offers a number of benefits and features for applications requiring high-performance and reliability. This article will discuss the general application field and working principle of the TANGO20/0.3M/SMAM/S/S/26 RF antenna.

Application Field of the TANGO20/0.3M/SMAM/S/S/26 RF Antenna

The TANGO20/0.3M/SMAM/S/S/26 RF antenna has a wide range of applications in the field of wireless communication, ranging from base station antennas to personal communications. The antenna is designed for use in both indoor and outdoor environments, as well as for in-building applications. It is suitable for both analogue and digital communication systems and can be used for both private and public networks.The antenna can be used in both narrowband and wideband systems. It is capable of transmitting and receiving signals in the 400MHz to 6GHz range. This makes the antenna particularly suitable for cellular, PCS, Wi-Fi, and ISM applications. The antenna also has a wide beamwidth, which makes it ideal for both directional and omnidirectional applications.

Working Principle of the TANGO20/0.3M/SMAM/S/S/26 RF Antenna

The TANGO20/0.3M/SMAM/S/S/26 RF antenna is based on the traditional half-wave dipole antenna design. However, the antenna features a special design that provides a number of benefits for wireless communication systems. The antenna is composed of two parts: an internal dipole antenna and external patch antenna. The internal dipole antenna is situated at the center of the patch antenna and is comprised of two vertical dipole elements. The dipole elements are fed by a 50-ohm coaxial cable. The external patch antenna is a rectangular plate designed to radiate a signal in a specific direction. The patch antenna is connected to the dipole antenna through an extra conductor, which is located at the center of the patch antenna. The extra conductor serves as a direct electrical connection between the dipole and the patch antenna. This direct connection allows the antenna to operate in both receiving and transmitting mode without the need for a separate transmitting antenna.The gain of the antenna is relatively high due to its design. The antenna provides a radiation pattern with a low side lobe in the vertical, horizontal and slant plane. This makes the antenna ideal for directional applications. The antenna also has a wide bandwidth capability, which makes it suitable for a variety of communication systems.

Conclusion

The TANGO20/0.3M/SMAM/S/S/26 RF antenna is a versatile antenna that can be used in a variety of communication applications. It is capable of transmitting and receiving signals in both narrowband and wideband systems and can be used in both indoor and outdoor environments. The antenna is based on the traditional half-wave dipole antenna design, but features a special design that provides a number of benefits. The antenna has a high gain and wide beamwidth, making it ideal for both directional and omnidirectional applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description